WellplannerNorwegian shelf well data

Fields / Alve / 6507/3-4

6507/3-4

Exploration, appraisalPlugged and abandonedGas shows

Drilled by Statoil ASA (old) with West Navigator in Alve, 14.03.2004 to 30.04.2004 (47 days), to 4 092,0 m in the Åre Formation.

Water depth372,0 m
Total depth4 092,0 m MD
Vertical depth4 089,0 m TVD
Bottom-hole temperature145 °C
Max inclination4,7°
Rotary table36,0 m
Formation at total depthÅre Formation
RigWest Navigator
Spud14.03.2004
Completed30.04.2004
OperatorStatoil ASA (old)
Position65,9879 N, 7,8460 E

Formations

26 tops reported, measured depth in metres.

GroupsNordland Group, top 408,0 mNordland GpHordaland Group, top 1 620,0 mHordaland GpRogaland Group, top 1 899,5 mShetland Group, top 1 994,5 mShetland GpCromer Knoll Group, top 2 882,5 mCromer Knoll GpViking Group, top 3 160,5 mViking GpFangst Group, top 3 724,5 mFangst GpBåt Group, top 3 856,0 mBåt GpFormationsNaust Formation, top 408,0 mNaust FmKai Formation, top 1 312,5 mKai FmBrygge Formation, top 1 620,0 mBrygge FmTare Formation, top 1 899,5 mTang Formation, top 1 942,0 mSpringar Formation, top 1 994,5 mSpringar FmNise Formation, top 2 124,0 mNise FmKvitnos Formation, top 2 823,5 mLange Formation, top 2 882,5 mLange FmLyr Formation, top 3 039,5 mSpekk Formation, top 3 160,5 mMelke Formation, top 3 185,0 mMelke FmGarn Formation, top 3 724,5 mNot Formation, top 3 738,0 mIle Formation, top 3 785,5 mRor Formation, top 3 856,0 mTilje Formation, top 3 918,5 mTilje FmÅre Formation, top 4 046,5 m4081 0002 0003 0004 0004 092

Temperature

Reported at total depth145 °C
Alve gradient39,2 °C/km
Estimated at total depth from the gradient148 °C

The gradient is the median of 4 released wells in Alve with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6507/3-11,74 757,0171 °C1,901990
6607/12-P-3 H2,56 751,0--2025
6607/12-P-2 H2,56 845,0--2025
6607/12-U-32,51 275,0--2023
6507/3-L-3 H2,75 333,0--2022
6507/3-L-4 AH2,76 137,0--2010
6507/3-L-4 H2,74 269,0--2010
6507/3-L-1 H2,75 255,0--2016

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"468,036"470,0-
Surface casing20"1 241,026"1 250,01,57 LOT
Intermediate13 3/8"2 300,017 1/2"2 310,01,80 LOT
Intermediate9 5/8"3 677,012 1/4"3 686,01,55 LOT
Open hole-4 092,08 1/2"4 092,0-

Mud weight

7 measurements, one dot each, 1,30 to 1,54 g/cm³ against measured depth, glydril 12, paratherm, sw / bentonite 1.

1,31,41,51,601 0002 0003 0004 0001 250,0 m: 1,35 g/cm³, SW / BENTONITE 11 930,0 m: 1,54 g/cm³, GLYDRIL 122 310,0 m: 1,54 g/cm³, GLYDRIL 123 030,0 m: 1,50 g/cm³, PARATHERM3 677,0 m: 1,37 g/cm³, PARATHERM3 725,5 m: 1,37 g/cm³, PARATHERM3 727,0 m: 1,37 g/cm³, PARATHERM
Show on the mapOpen on FactPages ↗