WellplannerNorwegian shelf well data

Fields / Alve / 6507/3-5 S

6507/3-5 S

Exploration, wildcatPlugged and abandonedGas and condensate

Drilled by StatoilHydro ASA with Ocean Vanguard in Alve, 28.02.2008 to 08.05.2008 (70 days), to 4 265,0 m in the Åre Formation.

Water depth368,0 m
Total depth4 265,0 m MD
Vertical depth3 834,0 m TVD
Bottom-hole temperature142 °C
Max inclination37,0°
Rotary table22,0 m
Formation at total depthÅre Formation
RigOcean Vanguard
Spud28.02.2008
Completed08.05.2008
OperatorStatoilHydro ASA
Position65,9685 N, 7,8098 E

Formations

28 tops reported, measured depth in metres.

GroupsNordland Group, top 390,0 mNordland GpHordaland Group, top 1 772,0 mHordaland GpRogaland Group, top 2 046,3 mShetland Group, top 2 137,4 mShetland GpCromer Knoll Group, top 3 239,8 mCromer Knoll GpViking Group, top 3 566,1 mViking GpFangst Group, top 3 959,7 mBåt Group, top 4 062,7 mBåt GpFormationsNaust Formation, top 390,0 mNaust FmKai Formation, top 1 415,0 mKai FmBrygge Formation, top 1 772,0 mBrygge FmTare Formation, top 2 046,3 mTang Formation, top 2 098,4 mSpringar Formation, top 2 137,4 mSpringar FmNise Formation, top 2 295,7 mNise FmKvitnos Formation, top 3 154,8 mLange Formation, top 3 239,8 mLange FmLyr Formation, top 3 432,1 mLyr FmSpekk Formation, top 3 566,1 mMelke Formation, top 3 570,4 mMelke FmGarn Formation, top 3 959,7 mNot Formation, top 3 971,7 mIle Formation, top 4 016,2 mRor Formation, top 4 062,7 mTofte Formation, top 4 080,0 mRor Formation, top 4 095,0 mTilje Formation, top 4 112,5 mÅre Formation, top 4 215,7 m3901 0002 0003 0004 0004 265

Temperature

Reported at total depth142 °C
Alve gradient39,2 °C/km
Estimated at total depth from the gradient139 °C

The gradient is the median of 4 released wells in Alve with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6507/3-L-2 H0,04 290,0--2009
6507/3-L-3 H0,05 333,0--2022
6507/3-L-1 H0,05 255,0--2016
6507/3-L-4 AH0,06 137,0--2010
6507/3-L-4 H0,04 269,0--2010
6507/3-U-10,4---2006
6507/3-11,04 757,0171 °C1,901990
6507/3-42,74 092,0145 °C1,542004

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"448,036"456,0-
Surface casing20"1 238,026"1 243,01,57 LOT
Intermediate13 3/8"2 066,017 1/2"2 480,01,60 LOT
Intermediate9 5/8"3 917,012 1/4"3 935,01,70 LOT
Open hole-4 265,08 1/2"4 265,0-

Mud weight

30 measurements, one dot each, 1,20 to 1,59 g/cm³ against measured depth, aquadrill, carbosea.

1,21,31,41,51,601 0002 0003 0004 0001 055,0 m: 1,50 g/cm³, CARBOSEA1 235,0 m: 1,52 g/cm³, Aquadrill1 246,0 m: 1,25 g/cm³, Aquadrill1 442,0 m: 1,28 g/cm³, Aquadrill1 500,0 m: 1,52 g/cm³, Aquadrill1 515,0 m: 1,51 g/cm³, Aquadrill1 759,0 m: 1,59 g/cm³, CARBOSEA1 907,0 m: 1,41 g/cm³, Aquadrill1 931,0 m: 1,59 g/cm³, CARBOSEA2 000,0 m: 1,59 g/cm³, CARBOSEA2 033,0 m: 1,59 g/cm³, CARBOSEA2 066,0 m: 1,54 g/cm³, Aquadrill2 130,0 m: 1,59 g/cm³, CARBOSEA2 140,0 m: 1,52 g/cm³, Aquadrill2 257,0 m: 1,52 g/cm³, Aquadrill2 449,0 m: 1,51 g/cm³, Aquadrill2 480,0 m: 1,51 g/cm³, Aquadrill2 508,0 m: 1,54 g/cm³, CARBOSEA2 767,0 m: 1,54 g/cm³, CARBOSEA3 000,0 m: 1,54 g/cm³, CARBOSEA3 395,0 m: 1,55 g/cm³, CARBOSEA3 728,0 m: 1,56 g/cm³, CARBOSEA3 935,0 m: 1,59 g/cm³, CARBOSEA3 959,0 m: 1,50 g/cm³, CARBOSEA4 013,0 m: 1,50 g/cm³, CARBOSEA4 145,0 m: 1,50 g/cm³, CARBOSEA4 180,0 m: 1,50 g/cm³, CARBOSEA4 203,0 m: 1,50 g/cm³, CARBOSEA4 265,0 m: 1,50 g/cm³, CARBOSEA4 580,0 m: 1,50 g/cm³, CARBOSEA
Show on the mapOpen on FactPages ↗