WellplannerNorwegian shelf well data

Fields / Skarv / 6507/5-1

6507/5-1

Exploration, wildcatPlugged and abandonedOil and gas and condensate

Drilled by Amoco Norway Oil Company with Mærsk Jutlander in Skarv, 24.12.1997 to 03.05.1998 (130 days), to 4 224,0 m in the Åre Formation.

Water depth323,2 m
Total depth4 224,0 m MD
Vertical depth4 222,0 m TVD
Bottom-hole temperature147 °C
Max inclination-
Rotary table23,3 m
Formation at total depthÅre Formation
RigMærsk Jutlander
Spud24.12.1997
Completed03.05.1998
OperatorAmoco Norway Oil Company
Position65,7434 N, 7,6513 E

Formations

26 tops reported, measured depth in metres.

GroupsNordland Group, top 346,5 mNordland GpHordaland Group, top 1 802,0 mHordaland GpRogaland Group, top 1 986,5 mShetland Group, top 2 076,0 mShetland GpCromer Knoll Group, top 2 716,0 mCromer Knoll GpViking Group, top 3 178,0 mViking GpFangst Group, top 3 380,0 mFangst GpBåt Group, top 3 517,0 mBåt GpFormationsNaust Formation, top 346,5 mNaust FmKai Formation, top 1 381,0 mKai FmBrygge Formation, top 1 802,0 mBrygge FmTare Formation, top 1 986,5 mTang Formation, top 2 032,0 mNise Formation, top 2 076,0 mNise FmKvitnos Formation, top 2 522,5 mKvitnos FmLysing Formation, top 2 716,0 mLange Formation, top 2 718,0 mLange FmSpekk Formation, top 3 178,0 mMelke Formation, top 3 194,0 mMelke FmGarn Formation, top 3 380,0 mNot Formation, top 3 434,0 mIle Formation, top 3 475,5 mRor Formation, top 3 517,0 mTofte Formation, top 3 576,9 mTilje Formation, top 3 578,8 mÅre Formation, top 3 688,0 mÅre Fm3461 0002 0003 0004 0004 224

Temperature

Reported at total depth147 °C
Skarv gradient37,2 °C/km
Estimated at total depth from the gradient148 °C

The gradient is the median of 10 released wells in Skarv with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6507/5-U-20,51 130,0--2010
6507/5-A-2 H0,65 048,0--2024
6507/5-A-3 AH0,64 654,0--2022
6507/5-A-3 H0,63 806,0--2010
6507/5-6 S0,64 991,0-1,602010
6507/5-A-1 H0,65 017,0--2011
6507/5-J-2 H0,64 138,0--2010
6507/5-J-1 H0,65 105,0--2010

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"480,036"496,0-
Surface casing20"1 053,026"1 065,01,67 LOT
Intermediate9 5/8"3 199,012 1/4"3 236,01,95 LOT
Liner7"3 863,08 1/2"4 224,0-
Open hole-4 224,08 1/2"4 224,0-

Mud weight

23 measurements, one dot each, 1,00 to 1,60 g/cm³ against measured depth, kill mud, oil based, sea water, spud mud.

1,01,21,41,601 0002 0003 0004 000350,0 m: 1,60 g/cm³, kill mud350,0 m: 1,20 g/cm³, spud mud442,0 m: 1,60 g/cm³, kill mud442,0 m: 1,00 g/cm³, spud mud496,0 m: 1,60 g/cm³, kill mud496,0 m: 1,00 g/cm³, spud mud571,0 m: 1,00 g/cm³, spud mud571,0 m: 1,50 g/cm³, kill mud1 053,0 m: 1,50 g/cm³, kill mud1 053,0 m: 1,00 g/cm³, spud mud1 065,0 m: 1,50 g/cm³, kill mud1 065,0 m: 1,30 g/cm³, spud mud1 065,0 m: 1,00 g/cm³, sea water1 065,0 m: 1,40 g/cm³, oil based3 199,0 m: 1,40 g/cm³, oil based3 235,0 m: 1,40 g/cm³, oil based3 236,0 m: 1,50 g/cm³, oil based3 241,0 m: 1,40 g/cm³, oil based3 472,0 m: 1,40 g/cm³, oil based3 542,0 m: 1,40 g/cm³, oil based3 932,0 m: 1,40 g/cm³, oil based4 085,0 m: 1,46 g/cm³, oil based4 224,0 m: 1,46 g/cm³, oil based

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
32 993,0 - 3 001,014,342,0-925222 000
2.13 430,0 - 3 442,015,936,0-178741 000
2.23 430,0 - 3 514,012,7--148580 000
13 607,0 - 3 653,015,937,0-628109 000
Show on the mapOpen on FactPages ↗