WellplannerNorwegian shelf well data

Fields / Skarv / 6507/5-4

6507/5-4

Exploration, appraisalPlugged and abandonedOil and gas

Drilled by BP Amoco Norge AS with Stena Dee in Skarv, 10.02.2001 to 15.04.2001 (64 days), to 3 812,0 m in the Åre Formation.

Water depth421,0 m
Total depth3 812,0 m MD
Vertical depth3 811,2 m TVD
Bottom-hole temperature124 °C
Max inclination6,7°
Rotary table25,0 m
Formation at total depthÅre Formation
RigStena Dee
Spud10.02.2001
Completed15.04.2001
OperatorBP Amoco Norge AS
Position65,6958 N, 7,5705 E

Formations

26 tops reported, measured depth in metres.

GroupsNordland Group, top 446,0 mNordland GpHordaland Group, top 1 818,9 mHordaland GpRogaland Group, top 2 002,0 mShetland Group, top 2 102,0 mShetland GpCromer Knoll Group, top 2 787,5 mCromer Knoll GpViking Group, top 3 370,5 mViking GpFangst Group, top 3 513,0 mFangst GpBåt Group, top 3 631,9 mBåt GpFormationsNaust Formation, top 446,0 mNaust FmKai Formation, top 1 398,2 mKai FmBrygge Formation, top 1 818,9 mBrygge FmTare Formation, top 2 002,0 mTang Formation, top 2 047,2 mSpringar Formation, top 2 102,0 mNise Formation, top 2 186,0 mNise FmKvitnos Formation, top 2 576,3 mKvitnos FmLysing Formation, top 2 787,5 mLange Formation, top 2 793,0 mLange FmLyr Formation, top 3 364,0 mMelke Formation, top 3 370,5 mMelke FmGarn Formation, top 3 513,0 mNot Formation, top 3 580,9 mIle Formation, top 3 609,2 mRor Formation, top 3 631,9 mTilje Formation, top 3 686,5 mÅre Formation, top 3 773,5 m4461 0002 0003 0003 812

Temperature

Reported at total depth124 °C
Skarv gradient37,2 °C/km
Estimated at total depth from the gradient129 °C

The gradient is the median of 10 released wells in Skarv with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6507/5-4 A same well0,03 883,0118 °C1,622001
6507/5-K-1 H1,03 834,0--2020
6507/5-U-41,21 346,0--2024
6507/5-U-31,21 228,0--2010
6507/5-B-2 H1,23 850,0--2010
6507/5-B-3 H1,23 812,0--2010
6507/5-B-5 AH1,35 622,0--2013
6507/5-B-5 H1,34 124,0--2010

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"519,036"522,0-
Surface casing20"1 461,026"1 466,01,62 LOT
Intermediate9 5/8"3 494,012 1/4"3 501,02,01 LOT
Open hole-3 820,08 1/2"3 820,0-

Mud weight

12 measurements, one dot each, 1,20 to 1,63 g/cm³ against measured depth, kcl, water/brine.

1,21,31,41,51,61,701 0002 0003 0001 635,0 m: 1,39 g/cm³, KCL2 648,0 m: 1,61 g/cm³, KCL2 850,0 m: 1,61 g/cm³, KCL2 999,0 m: 1,61 g/cm³, KCL3 271,0 m: 1,61 g/cm³, KCL3 488,0 m: 1,61 g/cm³, KCL3 500,0 m: 1,62 g/cm³, KCL3 535,0 m: 1,30 g/cm³, KCL3 709,0 m: 1,63 g/cm³, KCL3 812,0 m: 1,34 g/cm³, KCL3 883,0 m: 1,25 g/cm³, WATER/BRINE3 883,0 m: 1,28 g/cm³, KCL
Show on the mapOpen on FactPages ↗