WellplannerNorwegian shelf well data

Fields / Ula / 7/12-4

7/12-4

Exploration, appraisalSuspendedOil

Drilled by BP Norway Limited U.A. with Norskald in Ula, 11.09.1977 to 12.12.1977 (92 days), to 3 623,0 m in the Bryne Formation.

Water depth71,0 m
Total depth3 623,0 m MD
Vertical depth3 623,0 m TVD
Bottom-hole temperature144 °C
Max inclination1,9°
Rotary table25,0 m
Formation at total depthBryne Formation
RigNorskald
Spud11.09.1977
Completed12.12.1977
OperatorBP Norway Limited U.A.
Position57,0935 N, 2,8603 E

Formations

19 tops reported, measured depth in metres.

GroupsNordland Group, top 95,0 mNordland GpHordaland Group, top 1 587,0 mHordaland GpRogaland Group, top 2 583,0 mRogaland GpShetland Group, top 2 737,0 mShetland GpCromer Knoll Group, top 3 145,0 mCromer Knoll GpTyne Group, top 3 350,0 mVestland Group, top 3 445,0 mVestland GpFormationsBalder Formation, top 2 583,0 mSele Formation, top 2 618,0 mLista Formation, top 2 672,0 mMaureen Formation, top 2 704,0 mEkofisk Formation, top 2 737,0 mEkofisk FmTor Formation, top 2 899,0 mTor FmHod Formation, top 3 101,0 mRødby Formation, top 3 145,0 mRødby FmMandal Formation, top 3 350,0 mFarsund Formation, top 3 365,0 mUla Formation, top 3 445,0 mBryne Formation, top 3 529,0 m951 0002 0003 0003 623

Temperature

Reported at total depth144 °C
Drill-stem test at 3 552,0 m141 °C
Ula gradient39,2 °C/km
Estimated at total depth from the gradient142 °C

The gradient is the median of 8 released wells in Ula with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
7/12-4 R same well0,03 623,0--1984
7/12-1 S1,03 311,0120 °C1,531968
7/12-72,13 855,0149 °C1,561988
7/12-7 R2,13 855,0123 °C-1989
7/12-A-182,13 815,0--1987
7/12-A-122,14 093,0--1988
7/12-A-12 A2,14 655,0--1990
7/12-A-62,13 708,0--1986

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"169,036"174,0-
Surface casing20"492,026"498,0-
Intermediate13 3/8"1 678,017 1/2"1 694,0-
Intermediate9 5/8"3 369,012 1/4"3 373,0-
Liner7"3 620,08 1/2"3 621,0-

Mud weight

7 measurements, one dot each, 1,00 to 1,45 g/cm³ against measured depth, waterbased.

1,01,11,21,31,41,501 0002 0003 000498,0 m: 1,06 g/cm³, waterbased597,0 m: 1,43 g/cm³, waterbased1 125,0 m: 1,40 g/cm³, waterbased1 388,0 m: 1,44 g/cm³, waterbased1 694,0 m: 1,45 g/cm³, waterbased2 920,0 m: 1,44 g/cm³, waterbased3 339,0 m: 1,44 g/cm³, waterbased

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
33 453,0 - 3 472,012,4--1 11073 624
23 527,0 - 3 530,0---6-
13 536,0 - 3 552,0--141--
Show on the mapOpen on FactPages ↗