WellplannerNorwegian shelf well data

Fields / Yme / 9/2-9 S

9/2-9 S

Exploration, wildcatReclassified to developmentOil

Drilled by Den norske stats oljeselskap a.s with Byford Dolphin in Yme, 29.06.1999 to 17.09.1999 (80 days), to 4 367,0 m in the Bryne Formation.

Water depth77,0 m
Total depth4 367,0 m MD
Vertical depth3 386,0 m TVD
Bottom-hole temperature-
Max inclination-
Rotary table25,0 m
Formation at total depthBryne Formation
RigByford Dolphin
Spud29.06.1999
Completed17.09.1999
OperatorDen norske stats oljeselskap a.s
Position57,7542 N, 4,3557 E

Formations

24 tops reported, measured depth in metres.

GroupsNordland Group, top 102,0 mNordland GpHordaland Group, top 415,0 mHordaland GpRogaland Group, top 940,0 mShetland Group, top 1 050,0 mShetland GpCromer Knoll Group, top 1 907,7 mCromer Knoll GpBoknfjord Group, top 2 710,1 mBoknfjord GpVestland Group, top 3 844,0 mVestland GpFormationsBalder Formation, top 940,0 mSele Formation, top 980,0 mLista Formation, top 1 005,0 mVåle Formation, top 1 045,0 mEkofisk Formation, top 1 050,0 mTor Formation, top 1 160,0 mTor FmHod Formation, top 1 545,0 mHod FmBlodøks Formation, top 1 868,2 mRødby Formation, top 1 907,7 mSola Formation, top 1 952,6 mÅsgard Formation, top 2 019,0 mÅsgard FmFlekkefjord Formation, top 2 710,1 mSauda Formation, top 2 822,9 mSauda FmTau Formation, top 3 551,1 mEgersund Formation, top 3 669,3 mEgersund FmSandnes Formation, top 3 844,0 mSandnes FmBryne Formation, top 4 365,0 m1021 0002 0003 0004 0004 395

Temperature

Reported at total depth-
Yme gradient32,0 °C/km
Estimated at total depth from the gradient109 °C

The gradient is the median of 4 released wells in Yme with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
9/2-B-4 H0,04 367,0--1999
9/2-50,03 355,0118 °C1,501995
9/2-B-2 H0,03 438,0--1996
9/2-7 S0,04 099,0-1,601997
9/2-B-3 H0,04 499,0--1997
9/2-B-1 H0,03 355,0--1995
9/2-U-110,7115,9--2021
9/2-U-130,897,6--2021

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"161,036"165,0-
Intermediate20"1 062,026"1 071,0-
Intermediate13 3/8"1 944,017 1/2"1 954,01,60 LOT
Intermediate9 5/8"3 868,012 1/4"3 878,01,61 LOT
Open hole-4 367,08 1/2"4 367,0-

Mud weight

17 measurements, one dot each, 1,00 to 1,60 g/cm³ against measured depth, dummy, seawater/bent., ultidrill.

1,01,21,41,601 0002 0003 0004 000390,0 m: 1,03 g/cm³, DUMMY1 071,0 m: 1,03 g/cm³, DUMMY1 290,0 m: 1,03 g/cm³, SEAWATER/BENT.1 481,0 m: 1,03 g/cm³, DUMMY1 621,0 m: 1,03 g/cm³, DUMMY1 729,0 m: 1,03 g/cm³, DUMMY1 911,0 m: 1,03 g/cm³, DUMMY1 954,0 m: 1,03 g/cm³, SEAWATER/BENT.2 200,0 m: 1,56 g/cm³, DUMMY2 700,0 m: 1,54 g/cm³, ULTIDRILL3 464,0 m: 1,60 g/cm³, ULTIDRILL3 500,0 m: 1,60 g/cm³, ULTIDRILL3 878,0 m: 1,30 g/cm³, ULTIDRILL3 995,0 m: 1,25 g/cm³, ULTIDRILL4 058,0 m: 1,25 g/cm³, ULTIDRILL4 312,0 m: 1,25 g/cm³, ULTIDRILL4 367,0 m: 1,25 g/cm³, ULTIDRILL
Show on the mapOpen on FactPages ↗