WellplannerNorwegian shelf well data

Fields / Symra / 16/1-34 A

16/1-34 A

Exploration, appraisalPlugged and abandonedOil

Drilled by Lundin Energy Norway AS with Deepsea Stavanger in Symra, 01.08.2021 to 15.09.2021 (45 days), to 2 195,0 m in the Basement.

Water depth112,0 m
Total depth2 195,0 m MD
Vertical depth2 024,0 m TVD
Bottom-hole temperature90 °C
Max inclination30,1°
Rotary table30,0 m
Formation at total depthBasement
RigDeepsea Stavanger
Spud01.08.2021
Completed15.09.2021
OperatorLundin Energy Norway AS
Position58,9809 N, 2,3135 E

Formations

21 tops reported, measured depth in metres.

GroupsNordland Group, top 142,0 mNordland GpHordaland Group, top 911,0 mHordaland GpRogaland Group, top 1 865,5 mRogaland GpCromer Knoll Group, top 2 058,0 mZechstein Group, top 2 060,7 mBasement, top 2 109,4 mBasementFormationsNaust Formation, top 142,0 mNaust FmUndifferentiated, top 354,5 mUndifferentiatedUtsira Formation, top 752,0 mUndifferentiated, top 805,0 mUndifferentiatedSkade Formation, top 911,0 mSkade FmNo Formal Name, top 1 048,5 mNo Formal NameNo Formal Name, top 1 535,0 mNo Formal NameGrid Formation, top 1 692,0 mNo Formal Name, top 1 742,5 mNo Formal NameBalder Formation, top 1 865,5 mSele Formation, top 1 895,5 mLista Formation, top 1 903,0 mHeimdal Formation, top 1 968,7 mLista Formation, top 1 988,7 mVåle Formation, top 2 014,0 mVåle Fm1425001 0001 5002 0002 195

Temperature

Reported at total depth90 °C
Drill-stem test at 2 108,5 m83 °C
Symra gradient45,7 °C/km
Estimated at total depth from the gradient90 °C

The gradient is the median of 3 released wells in Symra with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
16/1-34 S same well0,02 383,0-1,422021
16/1-29 S1,42 024,0100 °C1,282018
16/1-6 A1,52 194,0-1,452003
16/1-6 S1,51 997,087 °C1,382003
16/1-30 A1,92 075,0-1,092019
16/1-30 S1,92 140,088 °C1,352019
16/1-EA-3 H2,12 880,0--2025
16/1-EA-4 AH2,14 374,0--2026

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"209,036"209,0-
Intermediate20"537,024"543,01,74 FIT
Intermediate13 3/8"1 484,016"1 490,01,61 FIT
Liner9 5/8"2 046,012 1/4"2 047,01,33 FIT
Open hole-2 195,08 1/2"2 195,0-

Mud weight

14 measurements, one dot each, 1,00 to 1,42 g/cm³ against measured depth, bentonite spud mud, glydril, glydril plus, kcl/polymer mud, obm, other, rheguard prime, wbm.

1,01,11,21,31,41,505001 0001 5002 000190,0 m: 1,05 g/cm³, Bentonite Spud Mud191,0 m: 1,38 g/cm³, KCL/Polymer mud545,0 m: 1,35 g/cm³, OBM610,0 m: 1,39 g/cm³, Rheguard Prime1 902,0 m: 1,40 g/cm³, OBM2 016,0 m: 1,42 g/cm³, OBM2 020,0 m: 1,31 g/cm³, Glydril2 047,0 m: 1,38 g/cm³, Rheguard Prime2 067,0 m: 1,03 g/cm³, Other2 079,0 m: 1,04 g/cm³, Other2 085,5 m: 1,31 g/cm³, Glydril Plus2 126,0 m: 1,32 g/cm³, Glydril Plus2 195,0 m: 1,05 g/cm³, WBM2 384,0 m: 1,31 g/cm³, Glydril Plus

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
12 057,6 - 2 108,516,6-8346848 150
Show on the mapOpen on FactPages ↗