WellplannerNorwegian shelf well data

Fields / Gyda / 2/1-3

2/1-3

Exploration, wildcatPlugged and abandonedOil

Drilled by BP Norway Limited U.A. with Sedco H in Gyda, 03.11.1979 to 29.03.1980 (147 days), to 4 297,0 m in the Zechstein Group.

Water depth66,0 m
Total depth4 297,0 m MD
Vertical depth4 296,0 m TVD
Bottom-hole temperature162 °C
Max inclination3,0°
Rotary table30,0 m
Formation at total depthZechstein Group
RigSedco H
Spud03.11.1979
Completed29.03.1980
OperatorBP Norway Limited U.A.
Position56,9115 N, 3,1084 E

Formations

25 tops reported, measured depth in metres.

GroupsNordland Group, top 95,6 mNordland GpHordaland Group, top 1 523,0 mHordaland GpRogaland Group, top 2 798,0 mRogaland GpShetland Group, top 2 987,0 mShetland GpCromer Knoll Group, top 3 534,0 mCromer Knoll GpTyne Group, top 3 791,0 mVestland Group, top 3 820,0 mVestland GpZechstein Group, top 4 219,0 mFormationsBalder Formation, top 2 798,0 mSele Formation, top 2 838,0 mForties Formation, top 2 845,0 mLista Formation, top 2 910,0 mEkofisk Formation, top 2 987,0 mTor Formation, top 3 000,0 mTor FmHod Formation, top 3 424,0 mBlodøks Formation, top 3 519,5 mHidra Formation, top 3 524,0 mRødby Formation, top 3 534,0 mTuxen Formation, top 3 579,0 mÅsgard Formation, top 3 625,0 mÅsgard FmMandal Formation, top 3 791,0 mUla Formation, top 3 820,0 mUla FmBryne Formation, top 3 990,5 mSkagerrak Formation, top 4 101,0 mSmith Bank Formation, top 4 162,5 m961 0002 0003 0004 0004 297

Temperature

Reported at total depth162 °C
Gyda gradient37,0 °C/km
Estimated at total depth from the gradient160 °C

The gradient is the median of 6 released wells in Gyda with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
2/1-U-81,6170,6--1987
2/1-A-11,64 900,0--1989
2/1-A-21,65 060,0--1989
2/1-A-2 A1,65 289,0--2007
2/1-A-31,64 747,0--1988
2/1-A-41,64 550,0--1988
2/1-A-51,64 595,0--1988
2/1-A-61,64 897,0--1988

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"139,036"143,0-
Surface casing18 5/8"595,024"608,01,81 LOT
Intermediate13 3/8"1 899,017 1/2"1 910,01,92 LOT
Intermediate9 5/8"3 558,012 1/4"3 566,02,00 LOT
Liner7"3 935,08 1/2"4 267,0-

Mud weight

6 measurements, one dot each, 1,10 to 1,68 g/cm³ against measured depth, waterbased.

1,11,21,31,41,51,61,701 0002 0003 0004 000930,0 m: 1,15 g/cm³, waterbased1 422,0 m: 1,30 g/cm³, waterbased2 227,0 m: 1,57 g/cm³, waterbased2 813,0 m: 1,60 g/cm³, waterbased3 409,0 m: 1,63 g/cm³, waterbased4 297,0 m: 1,68 g/cm³, waterbased

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
33 819,0 - 3 825,112,7--93339 000
23 838,5 - 3 844,612,7--1 05155 000
13 863,0 - 3 872,015,9--22619 000
Show on the mapOpen on FactPages ↗