WellplannerNorwegian shelf well data

Fields / Fenris / 2/4-21 A

2/4-21 A

Exploration, appraisalPlugged and abandonedGas and condensate

Drilled by Statoil Petroleum AS with Mærsk Gallant in Fenris, 25.05.2012 to 24.07.2012 (60 days), to 5 573,0 m in the Farsund Formation.

Water depth67,4 m
Total depth5 573,0 m MD
Vertical depth5 285,0 m TVD
Bottom-hole temperature-
Max inclination59,8°
Rotary table48,1 m
Formation at total depthFarsund Formation
RigMærsk Gallant
Spud25.05.2012
Completed24.07.2012
OperatorStatoil Petroleum AS
Position56,7002 N, 3,1429 E

Formations

21 tops reported, measured depth in metres.

GroupsNordland Group, top 115,0 mNordland GpHordaland Group, top 1 823,0 mHordaland GpRogaland Group, top 3 168,0 mRogaland GpShetland Group, top 3 505,0 mShetland GpCromer Knoll Group, top 4 540,0 mCromer Knoll GpTyne Group, top 4 769,0 mTyne GpFormationsUtsira Formation, top 510,0 mUtsira FmBalder Formation, top 3 168,0 mSele Formation, top 3 192,0 mLista Formation, top 3 262,0 mVåle Formation, top 3 354,0 mEkofisk Formation, top 3 382,0 mTor Formation, top 3 505,0 mTor FmHod Formation, top 3 977,0 mHod FmBlodøks Formation, top 4 518,5 mHidra Formation, top 4 519,5 mRødby Formation, top 4 540,0 mTuxen Formation, top 4 560,0 mÅsgard Formation, top 4 605,0 mMandal Formation, top 4 769,0 mFarsund Formation, top 4 797,0 mFarsund Fm1151 0002 0003 0004 0005 0005 573

Temperature

Reported at total depth-
Fenris gradient34,9 °C/km
Estimated at total depth from the gradient184 °C

The gradient is the median of 3 released wells in Fenris with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
2/4-21 same well0,05 395,0183 °C2,102012
2/4-U-60,095,0--2010
2/4-U-40,0254,0--2010
2/4-U-50,196,0--2010
2/4-U-360,5101,0--2011
2/4-U-350,6102,0--2011
2/4-U-340,6100,0--2011
2/4-U-310,8103,0--2011

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Open hole-4 649,08 1/2"5 573,02,27 LOT

Mud weight

12 measurements, one dot each, 1,60 to 2,08 g/cm³ against measured depth, obm-low ecd-hthp.

1,61,71,81,92,02,101 0002 0003 0004 0005 000650,0 m: 1,60 g/cm³, OBM-Low ECD-HTHP2 500,0 m: 1,78 g/cm³, OBM-Low ECD-HTHP3 985,0 m: 2,08 g/cm³, OBM-Low ECD-HTHP4 652,0 m: 2,08 g/cm³, OBM-Low ECD-HTHP4 695,0 m: 2,08 g/cm³, OBM-Low ECD-HTHP4 723,0 m: 2,08 g/cm³, OBM-Low ECD-HTHP4 787,0 m: 2,08 g/cm³, OBM-Low ECD-HTHP4 937,0 m: 2,08 g/cm³, OBM-Low ECD-HTHP5 011,0 m: 2,08 g/cm³, OBM-Low ECD-HTHP5 076,0 m: 2,08 g/cm³, OBM-Low ECD-HTHP5 285,0 m: 2,08 g/cm³, OBM-Low ECD-HTHP5 573,0 m: 2,08 g/cm³, OBM-Low ECD-HTHP
Show on the mapOpen on FactPages ↗