WellplannerNorwegian shelf well data

Fields / 25/8-7

25/8-7

Exploration, wildcatPlugged and abandonedOil shows

Drilled by Amerada Hess Norge AS with Dyvi Stena, 21.07.1995 to 12.08.1995 (22 days), to 2 380,0 m in the Amundsen Formation.

Water depth123,0 m
Total depth2 380,0 m MD
Vertical depth2 379,0 m TVD
Bottom-hole temperature81 °C
Max inclination3,7°
Rotary table25,0 m
Formation at total depthAmundsen Formation
RigDyvi Stena
Spud21.07.1995
Completed12.08.1995
OperatorAmerada Hess Norge AS
Position59,4746 N, 2,5746 E

Formations

29 tops reported, measured depth in metres.

GroupsNordland Group, top 148,0 mNordland GpHordaland Group, top 997,0 mHordaland GpRogaland Group, top 1 900,0 mRogaland GpShetland Group, top 2 209,0 mCromer Knoll Group, top 2 267,0 mViking Group, top 2 292,5 mVestland Group, top 2 318,0 mDunlin Group, top 2 340,0 mFormationsUtsira Formation, top 577,0 mUtsira FmNo Formal Name, top 997,0 mNo Formal NameSkade Formation, top 1 293,0 mNo Formal Name, top 1 348,0 mNo Formal NameGrid Formation, top 1 484,0 mNo Formal Name, top 1 504,0 mNo Formal NameBalder Formation, top 1 900,0 mSele Formation, top 1 947,0 mSele FmLista Formation, top 2 037,0 mHeimdal Formation, top 2 050,0 mLista Formation, top 2 061,5 mVåle Formation, top 2 079,0 mVåle FmTy Formation, top 2 157,0 mSvarte Formation, top 2 209,0 mRødby Formation, top 2 267,0 mÅsgard Formation, top 2 282,0 mDraupne Formation, top 2 292,5 mHeather Formation, top 2 298,5 mHugin Formation, top 2 318,0 mSleipner Formation, top 2 329,0 mAmundsen Formation, top 2 340,0 m1485001 0001 5002 0002 380

Temperature

Reported at total depth81 °C

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
25/8-93,92 548,091 °C1,311997
25/8-9 A3,92 687,0-1,321997
25/9-37,42 267,0-1,332009
25/9-18,12 525,091 °C1,281995
25/8-16 A8,32 324,0-1,472009
25/8-16 S8,32 550,084 °C1,502009
25/8-U-59,4172,0--1996
25/8-U-189,6164,5--1997

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"219,036"220,0-
Surface casing13 3/8"1 057,017 1/2"1 060,0-
Intermediate9 5/8"1 995,012 1/4"2 000,0-
Open hole-2 380,08 1/2"2 380,0-

Mud weight

10 measurements, one dot each, 1,20 to 1,29 g/cm³ against measured depth, water based.

1,21,305001 0001 5002 0001 074,0 m: 1,27 g/cm³, WATER BASED1 411,0 m: 1,27 g/cm³, WATER BASED1 855,0 m: 1,29 g/cm³, WATER BASED2 010,0 m: 1,29 g/cm³, WATER BASED2 042,0 m: 1,26 g/cm³, WATER BASED2 059,0 m: 1,26 g/cm³, WATER BASED2 186,0 m: 1,26 g/cm³, WATER BASED2 319,0 m: 1,26 g/cm³, WATER BASED2 341,0 m: 1,26 g/cm³, WATER BASED2 380,0 m: 1,26 g/cm³, WATER BASED
Show on the mapOpen on FactPages ↗