WellplannerNorwegian shelf well data

Fields / Munin / 30/11-14 B

30/11-14 B

Exploration, wildcatPlugged and abandonedOil and gas and condensate

Drilled by Statoil Petroleum AS with Songa Delta in Munin, 06.07.2016 to 23.07.2016 (17 days), to 4 187,0 m in the Drake Formation.

Water depth107,0 m
Total depth4 187,0 m MD
Vertical depth3 376,0 m TVD
Bottom-hole temperature126 °C
Max inclination63,5°
Rotary table29,0 m
Formation at total depthDrake Formation
RigSonga Delta
Spud06.07.2016
Completed23.07.2016
OperatorStatoil Petroleum AS
Position60,1916 N, 2,5864 E

Formations

28 tops reported, measured depth in metres.

GroupsNordland Group, top 136,0 mNordland GpHordaland Group, top 809,0 mHordaland GpRogaland Group, top 2 550,0 mRogaland GpShetland Group, top 3 160,0 mShetland GpViking Group, top 3 570,0 mBrent Group, top 3 634,0 mBrent GpDunlin Group, top 4 147,0 mFormationsUtsira Formation, top 492,0 mUtsira FmUndifferentiated, top 809,0 mSkade Formation, top 813,0 mUndifferentiated, top 944,0 mUndifferentiatedGrid Formation, top 1 335,0 mGrid FmNo Formal Name, top 1 479,0 mNo Formal Name, top 1 520,0 mNo Formal NameBalder Formation, top 2 550,0 mSele Formation, top 2 646,0 mHermod Formation, top 2 699,5 mSele Formation, top 2 730,0 mSele FmLista Formation, top 2 867,5 mLista FmVåle Formation, top 3 089,0 mHardråde Formation, top 3 160,0 mHardråde FmKyrre Formation, top 3 434,0 mKyrre FmHeather Formation, top 3 570,0 mTarbert Formation, top 3 634,0 mTarbert FmNess Formation, top 3 901,0 mNess FmEtive Formation, top 4 123,0 mRannoch Formation, top 4 128,5 mDrake Formation, top 4 147,0 m1361 0002 0003 0004 0004 187

Temperature

Reported at total depth126 °C
Munin gradient36,0 °C/km
Estimated at total depth from the gradient121 °C

The gradient is the median of 12 released wells in Munin with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
30/11-14 same well0,03 467,0125 °C1,392016
30/11-14 A same well0,0----
30/11-C-4 H1,3---2025
30/11-C-3 Y1H1,3---2025
30/11-C-3 Y2H1,3----
30/11-C-5 H1,3---2025
30/11-C-2 H1,3---2025
30/11-C-6 Y1H1,3---2025

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"172,036"172,0-
--456,0--1,55 FIT
Surface casing20"457,026"466,0-
Pilot hole-979,08 1/2"--
--1 521,0--1,63 FIT
Liner9 5/8"3 538,012 1/4"3 539,01,55 FIT
Open hole-4 187,08 1/2"4 187,0-

Mud weight

10 measurements, one dot each, 1,30 to 1,55 g/cm³ against measured depth, xp-07.

1,31,41,51,601 0002 0003 0004 0001 536,0 m: 1,39 g/cm³, XP-071 793,0 m: 1,55 g/cm³, XP-072 447,0 m: 1,55 g/cm³, XP-073 155,0 m: 1,55 g/cm³, XP-073 468,0 m: 1,30 g/cm³, XP-073 520,0 m: 1,55 g/cm³, XP-073 539,0 m: 1,30 g/cm³, XP-073 539,0 m: 1,35 g/cm³, XP-073 728,0 m: 1,31 g/cm³, XP-074 187,0 m: 1,30 g/cm³, XP-07
Show on the mapOpen on FactPages ↗