WellplannerNorwegian shelf well data

Fields / 30/11-3

30/11-3

Exploration, wildcatPlugged and abandonedOil and gas shows

Drilled by A/S Norske Shell with Borgny Dolphin, 17.11.1982 to 14.03.1983 (117 days), to 4 662,0 m in the Statfjord Group.

Water depth112,0 m
Total depth4 662,0 m MD
Vertical depth4 660,0 m TVD
Bottom-hole temperature141 °C
Max inclination4,6°
Rotary table25,0 m
Formation at total depthStatfjord Group
RigBorgny Dolphin
Spud17.11.1982
Completed14.03.1983
OperatorA/S Norske Shell
Position60,0441 N, 2,5376 E

Formations

24 tops reported, measured depth in metres.

GroupsNordland Group, top 137,0 mNordland GpHordaland Group, top 1 064,0 mHordaland GpRogaland Group, top 2 172,0 mRogaland GpShetland Group, top 2 601,0 mShetland GpCromer Knoll Group, top 3 239,0 mViking Group, top 3 285,0 mBrent Group, top 3 435,0 mBrent GpDunlin Group, top 4 019,0 mDunlin GpStatfjord Group, top 4 637,0 mFormationsUtsira Formation, top 499,0 mUtsira FmFrigg Formation, top 2 027,0 mBalder Formation, top 2 172,0 mSele Formation, top 2 200,0 mHermod Formation, top 2 205,0 mLista Formation, top 2 330,0 mLista FmHardråde Formation, top 2 601,0 mHardråde FmKyrre Formation, top 2 892,0 mKyrre FmTryggvason Formation, top 3 162,0 mDraupne Formation, top 3 285,0 mHeather Formation, top 3 316,5 mHeather FmDrake Formation, top 4 019,0 mDrake FmCook Formation, top 4 218,0 mBurton Formation, top 4 279,0 mAmundsen Formation, top 4 324,0 mAmundsen Fm1371 0002 0003 0004 0004 667

Temperature

Reported at total depth141 °C

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
30/11-40,45 255,0173 °C1,601984
30/11-14,32 682,0-1,221975
30/11-12 A5,44 173,0132 °C1,482016
30/11-12 S5,43 700,0136 °C1,602016
30/11-11 A6,44 016,0-1,502016
30/11-11 S6,43 675,0130 °C1,392016
30/11-9 A7,14 054,0-1,452013
30/11-9 S7,13 735,0133 °C1,602013

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"236,036"248,0-
Surface casing20"627,526"640,01,23 LOT
Intermediate13 3/8"1 994,017 1/2"2 023,01,66 LOT
Intermediate9 5/8"3 041,012 1/4"3 053,01,83 LOT
Open hole-4 000,08 1/2"4 662,0-

Mud weight

8 measurements, one dot each, 1,00 to 1,60 g/cm³ against measured depth, waterbased.

1,01,21,41,601 0002 0003 0004 000148,0 m: 1,06 g/cm³, waterbased870,0 m: 1,16 g/cm³, waterbased1 450,0 m: 1,17 g/cm³, waterbased2 190,0 m: 1,21 g/cm³, waterbased3 050,0 m: 1,40 g/cm³, waterbased3 800,0 m: 1,31 g/cm³, waterbased4 000,0 m: 1,30 g/cm³, waterbased4 662,0 m: 1,60 g/cm³, waterbased
Show on the mapOpen on FactPages ↗