WellplannerNorwegian shelf well data

Fields / Munin / 30/11-11 S

30/11-11 S

Exploration, wildcatPlugged and abandonedOil

Drilled by Statoil Petroleum AS with Songa Delta in Munin, 04.03.2016 to 19.03.2016 (15 days), to 3 675,0 m in the Ness Formation.

Water depth106,0 m
Total depth3 675,0 m MD
Vertical depth3 673,0 m TVD
Bottom-hole temperature130 °C
Max inclination10,0°
Rotary table29,0 m
Formation at total depthNess Formation
RigSonga Delta
Spud04.03.2016
Completed19.03.2016
OperatorStatoil Petroleum AS
Position60,0750 N, 2,6358 E

Formations

27 tops reported, measured depth in metres.

GroupsNordland Group, top 135,0 mNordland GpHordaland Group, top 689,0 mHordaland GpRogaland Group, top 2 157,0 mRogaland GpShetland Group, top 2 583,5 mShetland GpCromer Knoll Group, top 2 976,0 mCromer Knoll GpViking Group, top 3 094,5 mViking GpBrent Group, top 3 290,5 mBrent GpFormationsUndifferentiated, top 135,0 mUndifferentiatedUtsira Formation, top 426,0 mUtsira FmUndifferentiated, top 689,0 mUndifferentiatedGrid Formation, top 1 529,5 mNo Formal Name, top 1 583,0 mNo Formal NameNo Formal Name, top 1 710,0 mNo Formal NameFrigg Formation, top 2 093,0 mBalder Formation, top 2 157,0 mSele Formation, top 2 197,0 mHermod Formation, top 2 251,0 mHermod FmLista Formation, top 2 373,5 mVåle Formation, top 2 470,0 mHardråde Formation, top 2 583,5 mHardråde FmKyrre Formation, top 2 839,0 mKyrre FmRødby Formation, top 2 976,0 mÅsgard Formation, top 3 092,5 mDraupne Formation, top 3 094,5 mHeather Formation, top 3 140,0 mHeather FmTarbert Formation, top 3 290,5 mTarbert FmNess Formation, top 3 532,0 mNess Fm1351 0002 0003 0003 675

Temperature

Reported at total depth130 °C
Munin gradient36,0 °C/km
Estimated at total depth from the gradient131 °C

The gradient is the median of 12 released wells in Munin with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
30/11-11 A same well0,04 016,0-1,502016
30/11-12 A2,54 173,0132 °C1,482016
30/11-12 S2,53 700,0136 °C1,602016
30/11-9 A4,14 054,0-1,452013
30/11-9 S4,13 735,0133 °C1,602013
30/11-U-34,61 231,0--2021
30/11-V-6 H4,7---2026
30/11-V-2 H4,7---2025

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"185,036"185,0-
Surface casing13 3/8"1 142,017 1/2"1 150,01,56 FIT
Liner9 5/8"3 017,012 1/4"3 022,01,51 FIT
Open hole-3 675,08 1/2"3 675,0-

Mud weight

10 measurements, one dot each, 1,30 to 1,39 g/cm³ against measured depth, bentonite/polymer mud, xp-07.

1,31,401 0002 0003 000185,5 m: 1,30 g/cm³, Bentonite/Polymer mud850,0 m: 1,30 g/cm³, Bentonite/Polymer mud1 095,0 m: 1,34 g/cm³, XP-071 095,0 m: 1,30 g/cm³, XP-071 150,0 m: 1,39 g/cm³, XP-071 150,0 m: 1,30 g/cm³, Bentonite/Polymer mud1 638,0 m: 1,39 g/cm³, XP-072 543,0 m: 1,39 g/cm³, XP-073 027,0 m: 1,30 g/cm³, XP-073 675,0 m: 1,30 g/cm³, XP-07
Show on the mapOpen on FactPages ↗