WellplannerNorwegian shelf well data

Fields / Huldra / 30/2-1

30/2-1

Exploration, wildcatPlugged and abandonedGas and condensate

Drilled by Den norske stats oljeselskap a.s with Dyvi Delta in Huldra, 17.05.1982 to 12.10.1982 (148 days), to 4 243,0 m in the Statfjord Group.

Water depth125,0 m
Total depth4 243,0 m MD
Vertical depth4 237,0 m TVD
Bottom-hole temperature164 °C
Max inclination7,8°
Rotary table30,0 m
Formation at total depthStatfjord Group
RigDyvi Delta
Spud17.05.1982
Completed12.10.1982
OperatorDen norske stats oljeselskap a.s
Position60,8682 N, 2,6470 E

Formations

21 tops reported, measured depth in metres.

GroupsNordland Group, top 155,0 mNordland GpHordaland Group, top 957,0 mHordaland GpRogaland Group, top 1 917,0 mRogaland GpShetland Group, top 2 159,0 mShetland GpCromer Knoll Group, top 3 605,0 mViking Group, top 3 636,0 mBrent Group, top 3 675,0 mDunlin Group, top 3 793,0 mDunlin GpStatfjord Group, top 4 110,0 mFormationsUtsira Formation, top 847,0 mUtsira FmBalder Formation, top 1 917,0 mSele Formation, top 1 993,0 mLista Formation, top 2 105,0 mLista FmDraupne Formation, top 3 636,0 mHeather Formation, top 3 657,0 mNess Formation, top 3 675,0 mEtive Formation, top 3 720,0 mRannoch Formation, top 3 778,0 mDrake Formation, top 3 793,0 mDrake FmCook Formation, top 3 962,0 mBurton Formation, top 4 000,0 mBurton Fm1551 0002 0003 0004 0004 243

Temperature

Reported at total depth164 °C
Huldra gradient36,8 °C/km
Estimated at total depth from the gradient154 °C

The gradient is the median of 5 released wells in Huldra with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
30/2-A-61,44 330,0--2001
30/2-A-51,44 090,0--2001
30/2-A-91,45 710,0--2001
30/2-A-81,44 474,0--2000
30/2-A-111,45 048,0--2001
30/2-4 S1,44 325,0-2,012008
30/2-A-41,44 840,0--2000
30/2-32,44 325,0160 °C1,891992

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"216,036"219,0-
Surface casing20"1 020,026"1 035,01,70 LOT
Intermediate13 3/8"2 152,017 1/2"2 155,01,94 LOT
Intermediate9 5/8"3 491,012 1/4"3 501,01,99 LOT
Liner7"3 834,08 1/2"3 836,02,05 LOT
Open hole-4 243,06"4 243,0-

Mud weight

9 measurements, one dot each, 1,00 to 1,91 g/cm³ against measured depth, waterbased.

1,01,21,41,61,82,001 0002 0003 0004 000210,0 m: 1,03 g/cm³, waterbased260,0 m: 1,06 g/cm³, waterbased1 100,0 m: 1,10 g/cm³, waterbased1 780,0 m: 1,24 g/cm³, waterbased2 210,0 m: 1,70 g/cm³, waterbased2 600,0 m: 1,77 g/cm³, waterbased3 130,0 m: 1,80 g/cm³, waterbased3 670,0 m: 1,89 g/cm³, waterbased3 750,0 m: 1,91 g/cm³, waterbased

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
33 720,0 - 3 728,019,0--3961 016 000
23 761,0 - 3 771,019,0--4171 030 000
13 785,0 - 3 792,012,7--307677 000
Show on the mapOpen on FactPages ↗