WellplannerNorwegian shelf well data

Fields / Martin Linge / 30/4-2

30/4-2

Exploration, appraisalPlugged and abandonedGas and condensate

Drilled by BP Norway Limited U.A. with Sedco 707 in Martin Linge, 16.11.1979 to 16.05.1980 (182 days), to 4 775,0 m in the Hegre Group.

Water depth123,0 m
Total depth4 775,0 m MD
Vertical depth4 764,0 m TVD
Bottom-hole temperature163 °C
Max inclination8,0°
Rotary table25,0 m
Formation at total depthHegre Group
RigSedco 707
Spud16.11.1979
Completed16.05.1980
OperatorBP Norway Limited U.A.
Position60,5170 N, 2,0462 E

Formations

23 tops reported, measured depth in metres.

GroupsNordland Group, top 147,0 mNordland GpHordaland Group, top 975,0 mHordaland GpRogaland Group, top 1 959,0 mRogaland GpShetland Group, top 2 313,0 mShetland GpViking Group, top 3 705,0 mBrent Group, top 3 779,5 mBrent GpDunlin Group, top 4 061,0 mDunlin GpStatfjord Group, top 4 337,0 mStatfjord GpHegre Group, top 4 670,0 mFormationsFrigg Formation, top 1 820,0 mBalder Formation, top 1 959,0 mSele Formation, top 1 973,0 mHeimdal Formation, top 1 996,0 mHeimdal FmDraupne Formation, top 3 705,0 mHeather Formation, top 3 726,0 mTarbert Formation, top 3 779,5 mNess Formation, top 3 862,0 mNess FmEtive Formation, top 4 024,0 mRannoch Formation, top 4 036,0 mDrake Formation, top 4 061,0 mCook Formation, top 4 127,0 mBurton Formation, top 4 208,0 mAmundsen Formation, top 4 243,0 mAmundsen Fm1471 0002 0003 0004 0004 775

Temperature

Reported at total depth163 °C
Martin Linge gradient31,3 °C/km
Estimated at total depth from the gradient148 °C

The gradient is the median of 7 released wells in Martin Linge with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
30/4-D-1 AH1,24 500,0--2010
30/4-D-1 H1,24 128,0--2009
30/4-U-12,01 225,0--2013
30/4-A-12,13 518,0--2014
30/4-A-82,14 703,0--2014
30/4-A-32,12 055,0--2014
30/4-A-3 A2,12 831,0--2015
30/4-A-3 B2,13 470,0--2015

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"261,036"264,0-
Surface casing20"1 105,026"1 111,01,53 LOT
Intermediate13 3/8"2 499,017 1/2"2 506,01,79 LOT
Intermediate9 5/8"3 694,012 1/4"3 692,02,09 LOT
Liner7"4 170,08 1/2"4 172,02,27 LOT
Open hole-4 751,06"4 751,0-

Mud weight

7 measurements, one dot each, 1,00 to 2,09 g/cm³ against measured depth, waterbased.

1,01,21,41,61,82,02,201 0002 0003 0004 000946,0 m: 1,06 g/cm³, waterbased1 532,0 m: 1,19 g/cm³, waterbased2 091,0 m: 1,28 g/cm³, waterbased2 977,0 m: 1,65 g/cm³, waterbased3 455,0 m: 1,70 g/cm³, waterbased3 942,0 m: 2,04 g/cm³, waterbased4 751,0 m: 2,09 g/cm³, waterbased

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
13 807,0 - 3 813,015,0--6 818812 000
Show on the mapOpen on FactPages ↗