WellplannerNorwegian shelf well data

Fields / Oseberg Sør / 30/9-3 A

30/9-3 A

Exploration, appraisalPlugged and abandonedOil and gas

Drilled by Norsk Hydro Produksjon AS with Nortrym in Oseberg Sør, 26.02.1984 to 20.05.1984 (84 days), to 4 300,0 m in the Lunde Formation.

Water depth111,0 m
Total depth4 300,0 m MD
Vertical depth4 008,0 m TVD
Bottom-hole temperature138 °C
Max inclination35,5°
Rotary table25,0 m
Formation at total depthLunde Formation
RigNortrym
Spud26.02.1984
Completed20.05.1984
OperatorNorsk Hydro Produksjon AS
Position60,4712 N, 2,7604 E

Formations

21 tops reported, measured depth in metres.

GroupsNordland Group, top 135,0 mNordland GpHordaland Group, top 843,0 mHordaland GpRogaland Group, top 2 076,0 mRogaland GpShetland Group, top 2 424,0 mShetland GpBrent Group, top 2 853,0 mBrent GpDunlin Group, top 3 133,0 mDunlin GpStatfjord Group, top 3 679,0 mStatfjord GpHegre Group, top 4 249,0 mFormationsUtsira Formation, top 594,0 mUtsira FmBalder Formation, top 2 076,0 mSele Formation, top 2 170,0 mLista Formation, top 2 271,0 mLista FmVåle Formation, top 2 410,0 mVåle FmNess Formation, top 2 853,0 mNess FmEtive Formation, top 3 059,0 mDrake Formation, top 3 133,0 mDrake FmCook Formation, top 3 455,0 mBurton Formation, top 3 466,0 mAmundsen Formation, top 3 565,0 mAmundsen FmRaude Formation, top 4 161,0 mLunde Formation, top 4 249,0 m1351 0002 0003 0004 0004 300

Temperature

Reported at total depth138 °C
Oseberg Sør gradient36,3 °C/km
Estimated at total depth from the gradient145 °C

The gradient is the median of 16 released wells in Oseberg Sør with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
30/9-3 same well0,03 113,057 °C1,491983
30/9-4 S0,14 303,0111 °C1,511984
30/9-243,03 767,0-1,472009
30/9-U-23,1581,0--2009
30/9-23,42 830,0107 °C1,161983
30/9-2 R3,42 830,0107 °C1,251986
30/6-93,53 476,0116 °C1,321982
30/6-9 R3,53 476,0--1990

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"221,036"222,0-
Surface casing20"616,026"625,0-
Intermediate13 3/8"1 539,017 1/2"1 715,01,65 LOT
Intermediate9 5/8"3 251,012 1/4"3 268,01,71 LOT
Open hole-4 300,08 3/8"4 300,0-

Mud weight

11 measurements, one dot each, 1,20 to 1,46 g/cm³ against measured depth, oil based.

1,21,31,41,501 0002 0003 0004 0001 590,0 m: 1,44 g/cm³, OIL BASED2 625,0 m: 1,46 g/cm³, OIL BASED2 880,0 m: 1,45 g/cm³, OIL BASED3 175,0 m: 1,46 g/cm³, OIL BASED3 285,0 m: 1,30 g/cm³, OIL BASED3 610,0 m: 1,31 g/cm³, OIL BASED3 790,0 m: 1,30 g/cm³, OIL BASED3 900,0 m: 1,31 g/cm³, OIL BASED3 980,0 m: 1,30 g/cm³, OIL BASED4 180,0 m: 1,31 g/cm³, OIL BASED4 255,0 m: 1,26 g/cm³, OIL BASED

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
12 910,0 - 2 916,038,1--800108 000
Show on the mapOpen on FactPages ↗