WellplannerNorwegian shelf well data

Fields / 34/6-2 S

34/6-2 S

Exploration, wildcatPlugged and abandonedOil

Drilled by Total E&P Norge AS with Borgland Dolphin, 06.08.2012 to 05.11.2012 (91 days), to 4 335,0 m in the Lunde Formation.

Water depth385,5 m
Total depth4 335,0 m MD
Vertical depth4 081,0 m TVD
Bottom-hole temperature152 °C
Max inclination47,0°
Rotary table31,0 m
Formation at total depthLunde Formation
RigBorgland Dolphin
Spud06.08.2012
Completed05.11.2012
OperatorTotal E&P Norge AS
Position61,5901 N, 2,7539 E

Formations

26 tops reported, measured depth in metres.

GroupsNordland Group, top 416,5 mNordland GpHordaland Group, top 1 321,0 mHordaland GpRogaland Group, top 1 848,5 mRogaland GpShetland Group, top 2 034,5 mShetland GpCromer Knoll Group, top 3 449,0 mBrent Group, top 3 536,0 mDunlin Group, top 3 566,0 mDunlin GpStatfjord Group, top 4 055,0 mStatfjord GpHegre Group, top 4 252,0 mFormationsUtsira Formation, top 1 268,0 mUtsira FmBalder Formation, top 1 848,5 mSele Formation, top 1 872,0 mLista Formation, top 1 880,0 mLista FmVåle Formation, top 2 022,0 mJorsalfare Formation, top 2 034,5 mJorsalfare FmKyrre Formation, top 2 273,0 mKyrre FmTryggvason Formation, top 3 207,5 mTryggvason FmSola Formation, top 3 449,0 mRannoch Formation, top 3 536,0 mDrake Formation, top 3 566,0 mCook Formation, top 3 654,0 mBurton Formation, top 3 777,0 mAmundsen Formation, top 3 781,5 mAmundsen FmNansen Formation, top 4 055,0 mEiriksson Formation, top 4 095,0 mEiriksson FmLunde Formation, top 4 252,0 m4161 0002 0003 0004 0004 335

Temperature

Reported at total depth152 °C

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
34/6-2 A same well0,03 974,0-1,782012
34/6-5 S1,44 036,0150 °C1,852021
34/6-3 A2,14 019,0-1,822014
34/6-3 S2,14 462,0142 °C1,842014
34/6-1 S3,74 360,0147 °C1,742002
34/6-8 A5,1----
34/6-8 S5,14 153,0--2025
34/6-47,34 115,0148 °C1,862015

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"471,036"473,0-
Surface casing20"1 480,026"1 485,01,53 LOT
Pilot hole-1 491,09 7/8"1 491,0-
Intermediate13 3/8"2 047,017 1/2"2 076,01,70 LOT
Intermediate9 5/8"3 425,012 1/4"3 432,01,94 LOT
Liner7"3 948,08 1/2"3 948,02,24 FIT
Open hole-4 335,06"4 335,0-

Mud weight

14 measurements, one dot each, 1,40 to 1,90 g/cm³ against measured depth, kcl/polymer-glycol, nabm.

1,41,51,61,71,81,901 0002 0003 0004 0002 076,0 m: 1,41 g/cm³, KCl/Polymer-Glycol2 106,0 m: 1,62 g/cm³, NABM2 577,0 m: 1,62 g/cm³, NABM3 200,0 m: 1,82 g/cm³, NABM3 432,0 m: 1,64 g/cm³, NABM3 567,0 m: 1,74 g/cm³, NABM3 663,0 m: 1,76 g/cm³, NABM3 780,0 m: 1,82 g/cm³, NABM3 800,0 m: 1,85 g/cm³, NABM3 917,0 m: 1,84 g/cm³, NABM3 948,0 m: 1,87 g/cm³, NABM3 977,0 m: 1,85 g/cm³, NABM4 213,0 m: 1,90 g/cm³, NABM4 335,0 m: 1,90 g/cm³, NABM

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
13 677,0 - 3 750,011,0--670-
Show on the mapOpen on FactPages ↗