WellplannerNorwegian shelf well data

Fields / 34/6-3 S

34/6-3 S

Exploration, appraisalPlugged and abandonedOil

Drilled by Total E&P Norge AS with Leiv Eiriksson, 30.05.2014 to 24.09.2014 (117 days), to 4 462,0 m in the Statfjord Group.

Water depth380,5 m
Total depth4 462,0 m MD
Vertical depth3 816,0 m TVD
Bottom-hole temperature142 °C
Max inclination66,6°
Rotary table25,0 m
Formation at total depthStatfjord Group
RigLeiv Eiriksson
Spud30.05.2014
Completed24.09.2014
OperatorTotal E&P Norge AS
Position61,5749 N, 2,7302 E

Formations

25 tops reported, measured depth in metres.

GroupsNordland Group, top 405,5 mNordland GpHordaland Group, top 1 246,0 mHordaland GpRogaland Group, top 1 849,0 mRogaland GpShetland Group, top 2 022,0 mShetland GpBrent Group, top 3 759,0 mDunlin Group, top 3 793,0 mDunlin GpStatfjord Group, top 4 360,0 mFormationsUndifferentiated, top 405,5 mUndifferentiatedUtsira Formation, top 1 159,4 mUndifferentiated, top 1 246,0 mUndifferentiatedBalder Formation, top 1 849,0 mSele Formation, top 1 876,0 mLista Formation, top 1 886,0 mVåle Formation, top 2 008,0 mJorsalfare Formation, top 2 022,0 mJorsalfare FmKyrre Formation, top 2 249,1 mKyrre FmTryggvason Formation, top 3 377,0 mTryggvason FmSvarte Formation, top 3 642,5 mRannoch Formation, top 3 759,0 mDrake Formation, top 3 793,0 mCook Formation, top 3 850,6 mCook FmBurton Formation, top 4 000,5 mAmundsen Formation, top 4 013,4 mAmundsen FmNansen Formation, top 4 360,0 mEiriksson Formation, top 4 407,0 m4061 0002 0003 0004 0004 462

Temperature

Reported at total depth142 °C
Drill-stem test at 3 998,0 m132 °C

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
34/6-3 A same well0,04 019,0-1,822014
34/6-2 A2,13 974,0-1,782012
34/6-2 S2,14 335,0152 °C1,902012
34/6-1 S2,54 360,0147 °C1,742002
34/6-5 S3,04 036,0150 °C1,852021
34/6-6 S6,34 005,0142 °C1,812023
34/6-6 A6,3----
34/6-8 A6,9----

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"472,036"472,5-
Surface casing20"1 494,026"1 500,01,40 FIT
Intermediate13 3/8"2 049,017 1/2"2 058,01,63 LOT
Intermediate9 7/8"3 697,012 1/4"3 704,01,66 FIT
Liner7"4 249,08 1/2"4 462,0-

Mud weight

8 measurements, one dot each, 1,00 to 1,84 g/cm³ against measured depth, nabm, sea water, spud mud.

1,01,21,41,61,801 0002 0003 0004 000421,0 m: 1,03 g/cm³, Sea water472,5 m: 1,35 g/cm³, Spud mud734,0 m: 1,03 g/cm³, Sea water2 061,0 m: 1,62 g/cm³, NABM2 112,0 m: 1,65 g/cm³, NABM3 709,0 m: 1,84 g/cm³, NABM4 251,0 m: 1,82 g/cm³, NABM4 462,0 m: 1,84 g/cm³, NABM

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
13 911,0 - 3 998,09,5-13295016 731
Show on the mapOpen on FactPages ↗