WellplannerNorwegian shelf well data

Fields / Hyme / 6407/8-5 S

6407/8-5 S

Exploration, wildcatPlugged and abandonedOil

Drilled by StatoilHydro Petroleum AS with West Alpha in Hyme, 02.05.2009 to 26.05.2009 (24 days), to 3 240,0 m in the Grey Beds (informal).

Water depth252,0 m
Total depth3 240,0 m MD
Vertical depth2 368,7 m TVD
Bottom-hole temperature104 °C
Max inclination70,9°
Rotary table18,0 m
Formation at total depthGrey Beds (informal)
RigWest Alpha
Spud02.05.2009
Completed26.05.2009
OperatorStatoilHydro Petroleum AS
Position64,3491 N, 7,5623 E

Formations

24 tops reported, measured depth in metres.

GroupsNordland Group, top 270,0 mNordland GpHordaland Group, top 936,0 mHordaland GpRogaland Group, top 1 516,0 mRogaland GpShetland Group, top 1 730,0 mShetland GpViking Group, top 2 100,0 mViking GpFangst Group, top 2 252,5 mFangst GpBåt Group, top 2 487,5 mBåt GpGrey Beds (informal), top 2 905,0 mGrey Beds (informal)FormationsNaust Formation, top 270,0 mNaust FmKai Formation, top 900,0 mBrygge Formation, top 936,0 mBrygge FmTare Formation, top 1 516,0 mTang Formation, top 1 604,0 mTang FmSpringar Formation, top 1 730,0 mNise Formation, top 1 775,0 mNise FmKvitnos Formation, top 1 910,0 mKvitnos FmSpekk Formation, top 2 100,0 mMelke Formation, top 2 180,0 mGarn Formation, top 2 252,5 mNot Formation, top 2 316,5 mIle Formation, top 2 346,5 mIle FmRor Formation, top 2 487,5 mTilje Formation, top 2 549,0 mTilje FmÅre Formation, top 2 731,0 mÅre Fm2705001 0001 5002 0002 5003 0003 240

Temperature

Reported at total depth104 °C

1 released well in Hyme report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6407/8-5 A same well0,03 231,0-1,182009
6407/8-C-4 H1,12 397,0--2012
6407/8-C-2 AY1H1,14 430,0--2012
6407/8-C-2 AY2H1,13 551,0--2012
6407/8-C-2 H1,13 520,0--2012
6407/8-73,93 030,0-1,432015
6407/8-7 A3,93 178,0-1,472015
6407/8-64,83 420,0-1,512013

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"330,036"334,0-
Surface casing13 3/8"915,017 1/2"926,01,80 LOT
Intermediate9 5/8"2 467,012 1/4"2 469,0-
Open hole-3 240,08 1/2"3 240,0-

Mud weight

12 measurements, one dot each, 1,10 to 1,47 g/cm³ against measured depth, versatec.

1,11,21,31,41,501 0002 0003 000928,0 m: 1,47 g/cm³, Versatec1 070,0 m: 1,47 g/cm³, Versatec1 195,0 m: 1,47 g/cm³, Versatec1 360,0 m: 1,47 g/cm³, Versatec2 420,0 m: 1,13 g/cm³, Versatec2 440,0 m: 1,14 g/cm³, Versatec2 467,0 m: 1,47 g/cm³, Versatec2 541,0 m: 1,18 g/cm³, Versatec2 647,0 m: 1,47 g/cm³, Versatec2 879,0 m: 1,10 g/cm³, Versatec3 100,0 m: 1,10 g/cm³, Versatec3 240,0 m: 1,11 g/cm³, Versatec
Show on the mapOpen on FactPages ↗