WellplannerNorwegian shelf well data

Fields / Bauge / 6407/8-6

6407/8-6

Exploration, wildcatPlugged and abandonedOil

Drilled by Statoil Petroleum AS with Songa Trym in Bauge, 20.09.2013 to 20.10.2013 (30 days), to 3 420,0 m in the Grey Beds (informal).

Water depth282,0 m
Total depth3 420,0 m MD
Vertical depth3 420,0 m TVD
Bottom-hole temperature-
Max inclination-
Rotary table25,0 m
Formation at total depthGrey Beds (informal)
RigSonga Trym
Spud20.09.2013
Completed20.10.2013
OperatorStatoil Petroleum AS
Position64,3535 N, 7,4624 E

Formations

25 tops reported, measured depth in metres.

GroupsNordland Group, top 307,0 mNordland GpHordaland Group, top 1 022,0 mHordaland GpRogaland Group, top 1 677,0 mRogaland GpShetland Group, top 1 950,0 mShetland GpCromer Knoll Group, top 2 424,0 mCromer Knoll GpViking Group, top 2 754,0 mFangst Group, top 2 789,0 mBåt Group, top 2 831,0 mBåt GpFormationsNaust Formation, top 441,0 mNaust FmKai Formation, top 971,0 mBrygge Formation, top 1 022,0 mBrygge FmTare Formation, top 1 677,0 mTare FmTang Formation, top 1 805,0 mTang FmSpringar Formation, top 1 950,0 mNise Formation, top 1 996,0 mNise FmKvitnos Formation, top 2 167,0 mKvitnos FmLange Formation, top 2 424,0 mLange FmSpekk Formation, top 2 754,0 mMelke Formation, top 2 760,0 mIle Formation, top 2 789,0 mRor Formation, top 2 831,0 mTofte Formation, top 2 842,0 mRor Formation, top 2 872,0 mTilje Formation, top 2 902,0 mTilje FmÅre Formation, top 3 035,0 mÅre Fm3071 0002 0003 0003 420

Temperature

Reported at total depth-

No released well in Bauge reports a bottom-hole temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6407/8-6 A same well0,03 537,0-1,422013
6407/8-U-10,0996,0--2013
6407/8-D-1 H0,23 803,0--2020
6407/8-D-2 H0,23 898,0--2020
6407/8-C-2 AY1H4,34 430,0--2012
6407/8-C-2 AY2H4,33 551,0--2012
6407/8-C-2 H4,33 520,0--2012
6407/8-C-4 H4,32 397,0--2012

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"357,036"361,0-
Surface casing20"980,026"985,01,58 FIT
Intermediate9 5/8"1 982,012 1/4"1 991,01,61 FIT
Open hole-3 420,08 1/2"3 420,0-

Mud weight

9 measurements, one dot each, 1,20 to 1,51 g/cm³ against measured depth, xp-07 - yellow.

1,21,31,41,51,601 0002 0003 000989,0 m: 1,25 g/cm³, XP-07 - Yellow1 075,0 m: 1,26 g/cm³, XP-07 - Yellow1 236,0 m: 1,40 g/cm³, XP-07 - Yellow1 471,0 m: 1,50 g/cm³, XP-07 - Yellow1 735,0 m: 1,51 g/cm³, XP-07 - Yellow1 988,0 m: 1,42 g/cm³, XP-07 - Yellow2 918,0 m: 1,45 g/cm³, XP-07 - Yellow2 945,0 m: 1,45 g/cm³, XP-07 - Yellow3 420,0 m: 1,45 g/cm³, XP-07 - Yellow
Show on the mapOpen on FactPages ↗