WellplannerNorwegian shelf well data

Fields / Bauge / 6407/8-6 A

6407/8-6 A

Exploration, appraisalPlugged and abandonedOil

Drilled by Statoil Petroleum AS with Songa Trym in Bauge, 20.10.2013 to 09.12.2013 (50 days), to 3 537,0 m in the Åre Formation.

Water depth282,0 m
Total depth3 537,0 m MD
Vertical depth3 288,0 m TVD
Bottom-hole temperature-
Max inclination43,5°
Rotary table25,0 m
Formation at total depthÅre Formation
RigSonga Trym
Spud20.10.2013
Completed09.12.2013
OperatorStatoil Petroleum AS
Position64,3535 N, 7,4624 E

Formations

27 tops reported, measured depth in metres.

GroupsNordland Group, top 307,0 mNordland GpHordaland Group, top 1 022,0 mHordaland GpRogaland Group, top 1 677,0 mRogaland GpShetland Group, top 1 950,0 mShetland GpCromer Knoll Group, top 2 480,0 mCromer Knoll GpViking Group, top 2 820,0 mFangst Group, top 2 884,0 mFangst GpBåt Group, top 3 123,5 mBåt GpFormationsNaust Formation, top 441,0 mNaust FmKai Formation, top 971,0 mBrygge Formation, top 1 022,0 mBrygge FmTare Formation, top 1 677,0 mTare FmTang Formation, top 1 805,0 mTang FmSpringar Formation, top 1 950,0 mNise Formation, top 1 996,0 mNise FmKvitnos Formation, top 2 164,0 mKvitnos FmLange Formation, top 2 480,0 mLange FmSpekk Formation, top 2 820,0 mMelke Formation, top 2 828,0 mGarn Formation, top 2 884,0 mNot Formation, top 2 911,5 mNot FmIle Formation, top 3 023,0 mRor Formation, top 3 123,5 mTofte Formation, top 3 138,0 mRor Formation, top 3 172,0 mTilje Formation, top 3 224,0 mTilje FmÅre Formation, top 3 351,0 mÅre Fm3071 0002 0003 0003 537

Temperature

Reported at total depth-

No released well in Bauge reports a bottom-hole temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6407/8-6 same well0,03 420,0-1,512013
6407/8-U-10,0996,0--2013
6407/8-D-1 H0,23 803,0--2020
6407/8-D-2 H0,23 898,0--2020
6407/8-C-2 AY1H4,34 430,0--2012
6407/8-C-2 AY2H4,33 551,0--2012
6407/8-C-2 H4,33 520,0--2012
6407/8-C-4 H4,32 397,0--2012

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Open hole-2 000,08 1/2"3 537,0-

Mud weight

6 measurements, one dot each, 1,40 to 1,42 g/cm³ against measured depth, xp-07 - yellow.

1,41,501 0002 0003 0001 874,0 m: 1,42 g/cm³, XP-07 - Yellow1 913,0 m: 1,41 g/cm³, XP-07 - Yellow3 029,0 m: 1,41 g/cm³, XP-07 - Yellow3 041,0 m: 1,41 g/cm³, XP-07 - Yellow3 537,0 m: 1,42 g/cm³, XP-07 - Yellow3 537,0 m: 1,41 g/cm³, XP-07 - Yellow
Show on the mapOpen on FactPages ↗