WellplannerNorwegian shelf well data

Fields / Morvin / 6506/11-8

6506/11-8

Exploration, appraisalPlugged and abandonedOil

Drilled by Statoil ASA (old) with West Alpha in Morvin, 24.03.2006 to 16.07.2006 (114 days), to 4 990,0 m in the Tilje Formation.

Water depth380,0 m
Total depth4 990,0 m MD
Vertical depth4 988,0 m TVD
Bottom-hole temperature178 °C
Max inclination6,2°
Rotary table18,0 m
Formation at total depthTilje Formation
RigWest Alpha
Spud24.03.2006
Completed16.07.2006
OperatorStatoil ASA (old)
Position65,1204 N, 6,4470 E

Formations

29 tops reported, measured depth in metres.

GroupsNordland Group, top 398,0 mNordland GpHordaland Group, top 1 893,7 mHordaland GpRogaland Group, top 2 182,6 mShetland Group, top 2 310,9 mShetland GpCromer Knoll Group, top 3 392,9 mCromer Knoll GpViking Group, top 4 599,0 mFangst Group, top 4 622,9 mFangst GpBåt Group, top 4 797,7 mBåt GpFormationsNaust Formation, top 398,0 mNaust FmKai Formation, top 1 493,0 mKai FmBrygge Formation, top 1 893,7 mBrygge FmTare Formation, top 2 182,6 mTang Formation, top 2 252,2 mSpringar Formation, top 2 310,9 mSpringar FmNise Formation, top 2 503,4 mNise FmKvitnos Formation, top 2 704,4 mKvitnos FmLysing Formation, top 3 392,9 mLysing FmLange Formation, top 3 557,2 mLange FmNo Formal Name, top 4 256,8 mLange Formation, top 4 401,7 mLange FmLyr Formation, top 4 586,2 mSpekk Formation, top 4 599,0 mMelke Formation, top 4 600,0 mGarn Formation, top 4 622,9 mNot Formation, top 4 701,5 mIle Formation, top 4 734,8 mRor Formation, top 4 797,7 mTofte Formation, top 4 838,6 mTilje Formation, top 4 928,0 m3981 0002 0003 0004 0004 990

Temperature

Reported at total depth178 °C

2 released wells in Morvin report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6506/11-A-2 H2,46 351,0--2010
6506/11-A-1 H2,45 962,0--2009
6506/11-A-3 H2,44 752,0--2009
6506/11-A-4 H2,45 620,0--2010
6506/11-U-24,3403,0--2007
6506/11-U-15,3390,0--2007
6506/11-B-3 H5,35 934,0--2009
6506/11-75,54 977,5175 °C1,972001

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"446,036"448,0-
Surface casing20"1 341,026"1 350,01,72 LOT
Intermediate14"2 139,017 1/2"2 150,01,86 LOT
Intermediate9 7/8"4 500,012 1/4"4 500,02,06 LOT
Open hole-4 980,08 1/2"4 980,0-

Mud weight

11 measurements, one dot each, 1,00 to 1,86 g/cm³ against measured depth, glydril 18, paratherm, sw / bentonite 1.

1,01,21,41,61,801 0002 0003 0004 000446,0 m: 1,06 g/cm³, SW / BENTONITE 11 350,0 m: 1,30 g/cm³, SW / BENTONITE 11 823,0 m: 1,53 g/cm³, GLYDRIL 182 150,0 m: 1,62 g/cm³, GLYDRIL 182 320,0 m: 1,70 g/cm³, PARATHERM4 500,0 m: 1,78 g/cm³, PARATHERM4 606,0 m: 1,86 g/cm³, PARATHERM4 620,0 m: 1,86 g/cm³, PARATHERM4 624,0 m: 1,86 g/cm³, PARATHERM4 679,0 m: 1,86 g/cm³, PARATHERM4 775,0 m: 1,86 g/cm³, PARATHERM
Show on the mapOpen on FactPages ↗