WellplannerNorwegian shelf well data

Fields / Alve Nord / 6607/12-2 S

6607/12-2 S

Exploration, wildcatSuspendedOil and gas

Drilled by Total E&P Norge AS with Songa Delta in Alve Nord, 22.07.2011 to 25.10.2011 (95 days), to 4 404,0 m in the Åre Formation.

Water depth369,0 m
Total depth4 404,0 m MD
Vertical depth4 274,0 m TVD
Bottom-hole temperature158 °C
Max inclination30,0°
Rotary table29,0 m
Formation at total depthÅre Formation
RigSonga Delta
Spud22.07.2011
Completed25.10.2011
OperatorTotal E&P Norge AS
Position66,0217 N, 7,8640 E

Formations

26 tops reported, measured depth in metres.

GroupsNordland Group, top 398,0 mNordland GpHordaland Group, top 1 636,0 mHordaland GpRogaland Group, top 1 870,0 mShetland Group, top 1 973,0 mShetland GpCromer Knoll Group, top 2 862,0 mCromer Knoll GpViking Group, top 3 258,0 mViking GpFangst Group, top 3 610,0 mFangst GpBåt Group, top 3 753,0 mBåt GpFormationsNaust Formation, top 398,0 mNaust FmKai Formation, top 1 376,0 mKai FmBrygge Formation, top 1 636,0 mBrygge FmTare Formation, top 1 870,0 mTang Formation, top 1 912,0 mSpringar Formation, top 1 973,0 mNise Formation, top 2 102,0 mKvitnos Formation, top 2 198,0 mKvitnos FmLange Formation, top 2 862,0 mLange FmSpekk Formation, top 3 258,0 mMelke Formation, top 3 272,0 mMelke FmGarn Formation, top 3 610,0 mNot Formation, top 3 633,0 mIle Formation, top 3 672,0 mRor Formation, top 3 753,0 mTofte Formation, top 3 760,0 mTilje Formation, top 3 814,6 mÅre Formation, top 3 935,0 mÅre Fm3981 0002 0003 0004 0004 404

Temperature

Reported at total depth158 °C

1 released well in Alve Nord report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6607/12-U-33,61 275,0--2023
6607/12-P-2 H3,66 845,0--2025
6607/12-P-3 H3,66 751,0--2025
6507/3-43,84 092,0145 °C1,542004
6507/3-15,54 757,0171 °C1,901990
6507/3-136,43 420,0-1,682019
6507/3-13 A6,41 343,0--2019
6507/3-L-3 H6,45 333,0--2022

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"464,036"470,0-
Surface casing20"1 348,026"1 355,01,61 FIT
Pilot hole-1 355,09 7/8"1 355,0-
Intermediate13 3/8"1 972,017 1/2"1 981,01,75 FIT
Intermediate9 5/8"3 494,012 1/4"3 500,01,75 FIT
Open hole-4 217,08 1/2"4 217,0-

Mud weight

13 measurements, one dot each, 1,00 to 1,60 g/cm³ against measured depth, aquacol kcl/polymer/glycol, carbo tech, spud mud.

1,01,21,41,601 0002 0003 0004 000783,0 m: 1,06 g/cm³, SPUD MUD1 354,5 m: 1,45 g/cm³, AQUACOL KCL/POLYMER/GLYCOL1 380,0 m: 1,45 g/cm³, AQUACOL KCL/POLYMER/GLYCOL1 981,0 m: 1,59 g/cm³, CARBO TECH2 203,0 m: 1,60 g/cm³, CARBO TECH2 442,0 m: 1,48 g/cm³, CARBO TECH2 850,0 m: 1,60 g/cm³, CARBO TECH3 500,0 m: 1,60 g/cm³, CARBO TECH3 667,0 m: 1,45 g/cm³, CARBO TECH4 217,0 m: 1,46 g/cm³, CARBO TECH4 217,0 m: 1,46 g/cm³, CARBO TECH4 367,0 m: 1,46 g/cm³, CARBO TECH4 404,0 m: 1,46 g/cm³, CARBO TECH
Show on the mapOpen on FactPages ↗