WellplannerNorwegian shelf well data

Fields / Skuld / 6608/10-12 A

6608/10-12 A

Exploration, appraisalPlugged and abandonedOil

Drilled by StatoilHydro ASA with Ocean Vanguard in Skuld, 25.12.2008 to 25.01.2009 (31 days), to 3 075,0 m in the Åre Formation.

Water depth338,0 m
Total depth3 075,0 m MD
Vertical depth2 956,3 m TVD
Bottom-hole temperature-
Max inclination33,0°
Rotary table22,0 m
Formation at total depthÅre Formation
RigOcean Vanguard
Spud25.12.2008
Completed25.01.2009
OperatorStatoilHydro ASA
Position66,2294 N, 8,3127 E

Formations

24 tops reported, measured depth in metres.

GroupsNordland Group, top 360,0 mNordland GpHordaland Group, top 1 565,0 mHordaland GpRogaland Group, top 1 772,0 mRogaland GpShetland Group, top 1 862,0 mShetland GpCromer Knoll Group, top 2 624,0 mCromer Knoll GpViking Group, top 2 768,0 mViking GpFangst Group, top 2 885,0 mBåt Group, top 2 934,0 mBåt GpFormationsNaust Formation, top 360,0 mNaust FmKai Formation, top 1 403,0 mKai FmBrygge Formation, top 1 565,0 mBrygge FmTare Formation, top 1 772,0 mTang Formation, top 1 834,0 mSpringar Formation, top 1 862,0 mSpringar FmNise Formation, top 1 981,5 mNise FmKvitnos Formation, top 2 379,0 mKvitnos FmLysing Formation, top 2 624,0 mLange Formation, top 2 631,0 mLyr Formation, top 2 679,0 mSpekk Formation, top 2 768,0 mMelke Formation, top 2 777,0 mIntra Melke Fm Ss, top 2 798,0 mNot Formation, top 2 885,0 mÅre Formation, top 2 934,0 mÅre Fm3605001 0001 5002 0002 5003 0003 075

Temperature

Reported at total depth-

2 released wells in Skuld report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6608/10-12 same well0,03 180,0104 °C1,512008
6608/10-S-2 AH1,14 166,0--2013
6608/10-S-2 H1,13 676,0--2013
6608/10-S-1 AH1,13 748,0--2021
6608/10-S-1 H1,13 920,0--2013
6608/10-S-3 H1,13 274,0--2016
6608/10-S-4 AH1,14 023,0--2014
6608/10-S-4 H1,13 779,0--2013

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Open hole-3 075,08 1/2"3 075,0-

Mud weight

12 measurements, one dot each, 1,40 to 1,45 g/cm³ against measured depth, kcl/polymer/gem.

1,41,51,601 0002 0003 0002 040,0 m: 1,45 g/cm³, KCl/Polymer/GEM2 060,0 m: 1,45 g/cm³, KCl/Polymer/GEM2 332,0 m: 1,45 g/cm³, KCl/Polymer/GEM2 445,0 m: 1,45 g/cm³, KCl/Polymer/GEM2 472,0 m: 1,45 g/cm³, KCl/Polymer/GEM2 500,0 m: 1,45 g/cm³, KCl/Polymer/GEM2 554,0 m: 1,45 g/cm³, KCl/Polymer/GEM2 690,0 m: 1,45 g/cm³, KCl/Polymer/GEM3 004,0 m: 1,45 g/cm³, KCl/Polymer/GEM3 027,0 m: 1,45 g/cm³, KCl/Polymer/GEM3 071,0 m: 1,45 g/cm³, KCl/Polymer/GEM3 075,0 m: 1,45 g/cm³, KCl/Polymer/GEM
Show on the mapOpen on FactPages ↗