WellplannerNorwegian shelf well data

Fields / Skuld / 6608/10-12

6608/10-12

Exploration, wildcatPlugged and abandonedOil

Drilled by StatoilHydro ASA with Ocean Vanguard in Skuld, 19.10.2008 to 21.12.2008 (63 days), to 3 180,0 m in the Red Beds (informal).

Water depth338,0 m
Total depth3 180,0 m MD
Vertical depth3 179,3 m TVD
Bottom-hole temperature104 °C
Max inclination3,8°
Rotary table22,0 m
Formation at total depthRed Beds (informal)
RigOcean Vanguard
Spud19.10.2008
Completed21.12.2008
OperatorStatoilHydro ASA
Position66,2294 N, 8,3127 E

Formations

26 tops reported, measured depth in metres.

GroupsNordland Group, top 360,0 mNordland GpHordaland Group, top 1 565,0 mHordaland GpRogaland Group, top 1 772,0 mShetland Group, top 1 862,0 mShetland GpCromer Knoll Group, top 2 534,2 mCromer Knoll GpViking Group, top 2 673,5 mFangst Group, top 2 738,0 mBåt Group, top 2 770,0 mBåt GpGrey Beds (informal), top 3 060,0 mRed Beds (informal), top 3 133,0 mFormationsNaust Formation, top 360,0 mNaust FmKai Formation, top 1 403,0 mKai FmBrygge Formation, top 1 565,0 mBrygge FmTare Formation, top 1 772,0 mTang Formation, top 1 834,0 mSpringar Formation, top 1 862,0 mSpringar FmNise Formation, top 1 981,5 mNise FmKvitnos Formation, top 2 348,0 mKvitnos FmLysing Formation, top 2 534,2 mLange Formation, top 2 539,0 mLyr Formation, top 2 599,0 mSpekk Formation, top 2 673,5 mMelke Formation, top 2 676,5 mIntra Melke Fm Ss, top 2 687,6 mNot Formation, top 2 738,0 mÅre Formation, top 2 770,0 mÅre Fm3605001 0001 5002 0002 5003 0003 180

Temperature

Reported at total depth104 °C

2 released wells in Skuld report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6608/10-12 A same well0,03 075,0-1,452008
6608/10-S-2 AH1,14 166,0--2013
6608/10-S-2 H1,13 676,0--2013
6608/10-S-1 AH1,13 748,0--2021
6608/10-S-1 H1,13 920,0--2013
6608/10-S-3 H1,13 274,0--2016
6608/10-S-4 AH1,14 023,0--2014
6608/10-S-4 H1,13 779,0--2013

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"408,036"412,0-
Surface casing13 3/8"1 400,017 1/2"1 415,01,57 LOT
Intermediate9 5/8"2 499,012 1/4"2 500,01,96 LOT
Open hole-3 180,08 1/2"3 180,0-

Mud weight

14 measurements, one dot each, 1,30 to 1,51 g/cm³ against measured depth, kcl/polymer/gem, kcl/polymer/glycol, spud mud.

1,31,41,51,601 0002 0003 0001 415,0 m: 1,35 g/cm³, Spud Mud1 415,0 m: 1,39 g/cm³, KCl/Polymer/Glycol1 415,0 m: 1,35 g/cm³, Spud Mud1 480,0 m: 1,45 g/cm³, KCl/Polymer/Glycol1 584,0 m: 1,48 g/cm³, KCl/Polymer/Glycol1 760,0 m: 1,50 g/cm³, KCl/Polymer/Glycol2 145,0 m: 1,45 g/cm³, KCl/Polymer/GEM2 305,0 m: 1,50 g/cm³, KCl/Polymer/Glycol2 430,0 m: 1,50 g/cm³, KCl/Polymer/Glycol2 500,0 m: 1,51 g/cm³, KCl/Polymer/Glycol2 696,0 m: 1,35 g/cm³, KCl/Polymer/Glycol2 788,0 m: 1,35 g/cm³, KCl/Polymer/Glycol2 796,0 m: 1,35 g/cm³, KCl/Polymer/Glycol3 180,0 m: 1,37 g/cm³, KCl/Polymer/GEM
Show on the mapOpen on FactPages ↗