WellplannerNorwegian shelf well data

Fields / Snøhvit / 7120/8-2

7120/8-2

Exploration, appraisalPlugged and abandonedGas

Drilled by Den norske stats oljeselskap a.s with Nordraug in Snøhvit, 15.04.1982 to 29.07.1982 (105 days), to 2 590,0 m in the Fruholmen Formation.

Water depth245,0 m
Total depth2 590,0 m MD
Vertical depth2 590,0 m TVD
Bottom-hole temperature91 °C
Max inclination1,5°
Rotary table25,0 m
Formation at total depthFruholmen Formation
RigNordraug
Spud15.04.1982
Completed29.07.1982
OperatorDen norske stats oljeselskap a.s
Position71,3377 N, 20,4660 E

Formations

16 tops reported, measured depth in metres.

GroupsNordland Group, top 270,0 mNordland GpSotbakken Group, top 558,0 mSotbakken GpNygrunnen Group, top 877,0 mNygrunnen GpAdventdalen Group, top 961,0 mAdventdalen GpKapp Toscana Group, top 2 081,0 mKapp Toscana GpFormationsTorsk Formation, top 558,0 mTorsk FmKveite Formation, top 877,0 mKveite FmKolmule Formation, top 961,0 mKolmule FmKolje Formation, top 1 552,0 mKolje FmKnurr Formation, top 1 869,0 mKnurr FmHekkingen Formation, top 1 955,0 mHekkingen FmFuglen Formation, top 2 078,0 mStø Formation, top 2 081,0 mStø FmNordmela Formation, top 2 190,0 mNordmela FmTubåen Formation, top 2 375,0 mTubåen FmFruholmen Formation, top 2 455,0 mFruholmen Fm2705001 0001 5002 0002 5002 590

Temperature

Reported at total depth91 °C
Drill-stem test at 2 097,0 m72 °C
Snøhvit gradient37,8 °C/km
Estimated at total depth from the gradient92 °C

The gradient is the median of 18 released wells in Snøhvit with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
7120/8-L-2 AH2,73 536,0--2020
7120/8-L-2 H2,72 248,0--2019
7120/8-L-4 H2,74 480,0--2019
7120/7-25,32 523,097 °C1,321983
7120/8-J-1 AH7,23 210,0--2020
7120/8-J-1 H7,22 321,0--2019
7120/8-18,12 610,095 °C1,451981
7120/7-110,32 839,0102 °C1,361982

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"332,036"333,0-
Surface casing20"735,026"752,0-
Intermediate13 3/8"792,017 1/2"800,01,65 LOT
Intermediate9 5/8"1 675,012 1/4"1 682,01,72 LOT
Liner7"2 590,08 1/2"2 590,0-

Mud weight

7 measurements, one dot each, 1,00 to 1,45 g/cm³ against measured depth, spud mud, water based.

1,01,11,21,31,41,505001 0001 5002 0002 500333,0 m: 1,05 g/cm³, spud mud750,0 m: 1,10 g/cm³, water based802,0 m: 1,20 g/cm³, water based1 682,0 m: 1,45 g/cm³, water based2 085,0 m: 1,45 g/cm³, water based2 218,0 m: 1,45 g/cm³, water based2 590,0 m: 1,45 g/cm³, water based

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
12 092,0 - 2 097,017,517,07217470 000
Show on the mapOpen on FactPages ↗