WellplannerNorwegian shelf well data

Fields / Oda / 8/10-4 A

8/10-4 A

Exploration, appraisalPlugged and abandonedDry

Drilled by Centrica Resources (Norge) AS with Mærsk Guardian in Oda, 27.10.2011 to 18.12.2011 (52 days), to 3 639,0 m in the Skagerrak Formation.

Water depth66,0 m
Total depth3 639,0 m MD
Vertical depth3 360,0 m TVD
Bottom-hole temperature-
Max inclination48,2°
Rotary table44,0 m
Formation at total depthSkagerrak Formation
RigMærsk Guardian
Spud27.10.2011
Completed18.12.2011
OperatorCentrica Resources (Norge) AS
Position57,0649 N, 3,0454 E

Formations

23 tops reported, measured depth in metres.

GroupsNordland Group, top 110,0 mNordland GpHordaland Group, top 1 380,0 mHordaland GpRogaland Group, top 2 258,0 mRogaland GpShetland Group, top 2 502,0 mShetland GpCromer Knoll Group, top 2 846,0 mCromer Knoll GpTyne Group, top 3 278,0 mTyne GpVestland Group, top 3 432,0 mVestland GpFormationsBalder Formation, top 2 258,0 mSele Formation, top 2 288,0 mLista Formation, top 2 307,0 mLista FmVidar Formation, top 2 475,0 mVåle Formation, top 2 495,0 mEkofisk Formation, top 2 502,0 mTor Formation, top 2 556,0 mTor FmHod Formation, top 2 695,0 mHod FmRødby Formation, top 2 846,0 mSola Formation, top 2 883,0 mTuxen Formation, top 2 907,0 mÅsgard Formation, top 2 922,0 mÅsgard FmMandal Formation, top 3 278,0 mFarsund Formation, top 3 334,0 mUla Formation, top 3 432,0 mUla FmSkagerrak Formation, top 3 602,0 m1101 0002 0003 0003 639

Temperature

Reported at total depth-

1 released well in Oda report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
8/10-4 B same well0,02 549,0-1,512011
8/10-4 S same well0,03 071,0128 °C1,592011
8/10-B-3 AH1,52 905,0--2018
8/10-B-3 BH1,5----
8/10-B-3 H1,52 641,0--2018
8/10-B-2 H1,53 640,0--2018
8/10-U-51,5420,0--2015
8/10-B-1 AH1,52 950,0--2022

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"218,636"226,0-
Intermediate13 3/8"1 001,017 1/2"1 011,0-
Pilot hole-1 011,09 7/8"1 011,0-
Intermediate9 5/8"2 266,012 1/4"2 266,0-
Open hole-3 639,08 1/2"3 639,0-

Mud weight

15 measurements, one dot each, 1,40 to 1,59 g/cm³ against measured depth, enviromul, enviromul.

1,41,51,601 0002 0003 000450,0 m: 1,46 g/cm³, ENVIROMUL700,0 m: 1,46 g/cm³, Enviromul963,0 m: 1,52 g/cm³, Enviromul1 011,0 m: 1,52 g/cm³, Enviromul1 105,0 m: 1,52 g/cm³, Enviromul1 380,0 m: 1,44 g/cm³, ENVIROMUL2 257,0 m: 1,59 g/cm³, Enviromul2 412,0 m: 1,44 g/cm³, Enviromul2 438,0 m: 1,46 g/cm³, ENVIROMUL2 662,0 m: 1,46 g/cm³, ENVIROMUL2 811,0 m: 1,44 g/cm³, ENVIROMUL2 844,0 m: 1,46 g/cm³, Enviromul2 914,0 m: 1,44 g/cm³, ENVIROMUL2 999,0 m: 1,46 g/cm³, Enviromul3 575,0 m: 1,44 g/cm³, Enviromul
Show on the mapOpen on FactPages ↗