WellplannerNorwegian shelf well data

Fields / Fenris / 2/4-23 S

2/4-23 S

Exploration, wildcatPlugged and abandonedGas and condensate

Drilled by Statoil Petroleum AS with Mærsk Gallant in Fenris, 12.03.2015 to 05.09.2015 (177 days), to 5 548,0 m in the Skagerrak Formation.

Water depth69,0 m
Total depth5 548,0 m MD
Vertical depth5 448,0 m TVD
Bottom-hole temperature190 °C
Max inclination25,1°
Rotary table48,0 m
Formation at total depthSkagerrak Formation
RigMærsk Gallant
Spud12.03.2015
Completed05.09.2015
OperatorStatoil Petroleum AS
Position56,6908 N, 3,1019 E

Formations

27 tops reported, measured depth in metres.

GroupsNordland Group, top 117,0 mNordland GpHordaland Group, top 1 854,5 mHordaland GpRogaland Group, top 3 271,0 mRogaland GpShetland Group, top 3 483,5 mShetland GpCromer Knoll Group, top 4 846,5 mTyne Group, top 4 907,0 mTyne GpVestland Group, top 5 205,0 mHegre Group, top 5 309,5 mHegre GpFormationsBalder Formation, top 3 271,0 mSele Formation, top 3 298,0 mLista Formation, top 3 340,0 mVidar Formation, top 3 368,0 mLista Formation, top 3 405,0 mVåle Formation, top 3 455,0 mEkofisk Formation, top 3 483,5 mTor Formation, top 3 604,0 mTor FmHod Formation, top 4 077,0 mHod FmBlodøks Formation, top 4 798,0 mHidra Formation, top 4 824,0 mRødby Formation, top 4 846,5 mSola Formation, top 4 850,0 mTuxen Formation, top 4 857,0 mÅsgard Formation, top 4 885,5 mFarsund Formation, top 4 907,0 mFarsund FmHaugesund Formation, top 5 141,5 mUla Formation, top 5 205,0 mSkagerrak Formation, top 5 309,5 mSkagerrak Fm1171 0002 0003 0004 0005 0005 548

Temperature

Reported at total depth190 °C
Fenris gradient34,9 °C/km
Estimated at total depth from the gradient190 °C

The gradient is the median of 3 released wells in Fenris with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
2/4-FE-81,55 534,0--2025
2/4-FE-8 A1,55 979,0--2025
2/4-FE-61,55 317,0--2025
2/4-FE-31,55 577,0--2024
2/4-FE-21,55 645,0--2024
2/4-U-771,51 222,0--2021
2/4-U-322,491,0--2011
2/4-U-312,4103,0--2011

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"224,036"224,0-
Surface casing20"443,724"457,01,48 FIT
Pilot hole-457,09 7/8"457,0-
Liner16"1 447,717 1/2"1 452,01,78 FIT
Intermediate13 5/8"3 516,617 1/2"3 560,01,97 FIT
Intermediate9 7/8"4 868,012 1/4"4 876,02,23 FIT
--5 235,08 1/2"5 235,02,19 FIT
Open hole-5 548,08 1/2"5 548,02,20 FIT

Mud weight

34 measurements, one dot each, 1,10 to 2,18 g/cm³ against measured depth, glydril, versatec, warp.

1,11,31,51,71,92,12,301 0002 0003 0004 0005 000233,0 m: 1,45 g/cm³, Glydril260,0 m: 1,10 g/cm³, Glydril456,0 m: 1,20 g/cm³, Glydril799,0 m: 1,85 g/cm³, Versatec870,0 m: 1,20 g/cm³, Versatec1 452,0 m: 1,25 g/cm³, Versatec1 491,0 m: 1,70 g/cm³, Versatec2 866,0 m: 1,84 g/cm³, Versatec3 241,0 m: 1,71 g/cm³, Versatec3 560,0 m: 1,72 g/cm³, Versatec3 790,0 m: 1,60 g/cm³, Versatec4 045,0 m: 1,85 g/cm³, Versatec4 132,0 m: 1,62 g/cm³, Versatec4 148,0 m: 1,85 g/cm³, Versatec4 207,0 m: 1,62 g/cm³, Versatec4 238,0 m: 1,85 g/cm³, Versatec4 315,0 m: 1,62 g/cm³, Versatec4 328,0 m: 1,85 g/cm³, Versatec4 375,0 m: 1,62 g/cm³, Versatec4 378,0 m: 1,85 g/cm³, Versatec4 380,0 m: 1,62 g/cm³, Versatec4 530,0 m: 1,65 g/cm³, Versatec4 633,0 m: 1,80 g/cm³, Versatec4 776,0 m: 2,00 g/cm³, WARP4 787,0 m: 1,82 g/cm³, Versatec4 850,0 m: 2,18 g/cm³, WARP4 876,0 m: 1,85 g/cm³, Versatec4 932,0 m: 2,00 g/cm³, WARP4 957,0 m: 2,18 g/cm³, WARP5 041,0 m: 2,00 g/cm³, WARP5 235,0 m: 2,16 g/cm³, WARP5 338,0 m: 2,18 g/cm³, WARP5 500,0 m: 2,04 g/cm³, WARP5 548,0 m: 2,18 g/cm³, WARP
Show on the mapOpen on FactPages ↗