WellplannerNorwegian shelf well data

Fields / Hugin Satellitter / 25/2-18 A

25/2-18 A

Exploration, appraisalPlugged and abandonedOil

Drilled by Det norske oljeselskap ASA with Maersk Interceptor in Hugin Satellitter, 11.09.2016 to 19.10.2016 (38 days), to 4 066,0 m in the Drake Formation.

Water depth121,0 m
Total depth4 066,0 m MD
Vertical depth3 723,0 m TVD
Bottom-hole temperature125 °C
Max inclination42,2°
Rotary table55,0 m
Formation at total depthDrake Formation
RigMaersk Interceptor
Spud11.09.2016
Completed19.10.2016
OperatorDet norske oljeselskap ASA
Position59,8250 N, 2,6317 E

Formations

30 tops reported, measured depth in metres.

GroupsNordland Group, top 176,0 mNordland GpHordaland Group, top 641,7 mHordaland GpUndefined Group, top 1 446,0 mHordaland Group, top 1 542,0 mHordaland GpRogaland Group, top 2 158,0 mRogaland GpShetland Group, top 2 806,0 mShetland GpCromer Knoll Group, top 3 524,0 mViking Group, top 3 585,0 mVestland Group, top 3 698,0 mVestland GpDunlin Group, top 4 049,0 mFormationsUtsira Formation, top 506,0 mUtsira FmSkade Formation, top 641,7 mSkade FmBalder Formation, top 2 158,0 mSele Formation, top 2 240,0 mHermod Formation, top 2 327,0 mLista Formation, top 2 426,0 mLista FmVåle Formation, top 2 722,0 mEkofisk Formation, top 2 806,0 mHardråde Formation, top 2 854,0 mHardråde FmKyrre Formation, top 3 136,0 mKyrre FmTryggvason Formation, top 3 337,0 mTryggvason FmBlodøks Formation, top 3 482,0 mSvarte Formation, top 3 490,0 mRødby Formation, top 3 524,0 mÅsgard Formation, top 3 567,0 mDraupne Formation, top 3 585,0 mHeather Formation, top 3 669,0 mHugin Formation, top 3 698,0 mSleipner Formation, top 3 825,5 mSleipner FmDrake Formation, top 4 049,0 m1761 0002 0003 0004 0004 079

Temperature

Reported at total depth125 °C
Hugin Satellitter gradient33,8 °C/km
Estimated at total depth from the gradient124 °C

The gradient is the median of 11 released wells in Hugin Satellitter with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
25/2-18 B same well0,04 335,0127 °C1,402016
25/2-18 C same well0,04 369,0133 °C1,302016
25/2-18 S same well0,03 887,0129 °C1,302016
25/2-U-90,71 427,0--2021
25/2-U-141,51 300,0--2023
25/2-S-4 AH1,5---2026
25/2-S-4 BH1,5---2026
25/2-S-4 CH1,5---2026

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"222,036"214,0-
Surface casing20"444,526"450,01,32 LOT
Pilot hole-450,09 7/8"450,0-
Surface casing13 3/8"1 533,516"1 541,01,58 FIT
Intermediate9 5/8"3 680,012 1/4"3 685,01,88 LOT
Liner7"4 050,08 1/2"--
Open hole-4 066,08 1/2"4 066,0-

Mud weight

7 measurements, one dot each, 1,10 to 1,40 g/cm³ against measured depth, nacl brine, versatec, versatec obm.

1,11,21,31,401 0002 0003 0004 0001 533,0 m: 1,40 g/cm³, Versatec2 064,0 m: 1,37 g/cm³, Versatec OBM2 900,0 m: 1,40 g/cm³, NaCl brine2 967,0 m: 1,37 g/cm³, Versatec OBM3 685,0 m: 1,17 g/cm³, Versatec OBM3 685,0 m: 1,40 g/cm³, Versatec OBM4 066,0 m: 1,17 g/cm³, Versatec OBM

Drill-stem tests

Choke in mm, bottom-hole pressure in bar, downhole temperature in °C, oil and gas in Sm³ per day.

TestInterval, mChokePressureTemp.OilGas
23 713,7 - 3 724,912,7--34951 624
13 741,5 - 3 767,115,8--60086 413
Show on the mapOpen on FactPages ↗