WellplannerNorwegian shelf well data

Fields / Hugin Satellitter / 25/2-18 B

25/2-18 B

Exploration, appraisalPlugged and abandonedDry

Drilled by Aker BP ASA with Maersk Interceptor in Hugin Satellitter, 19.10.2016 to 30.10.2016 (11 days), to 4 335,0 m in the Sleipner Formation.

Water depth121,0 m
Total depth4 335,0 m MD
Vertical depth3 803,0 m TVD
Bottom-hole temperature127 °C
Max inclination47,6°
Rotary table55,0 m
Formation at total depthSleipner Formation
RigMaersk Interceptor
Spud19.10.2016
Completed30.10.2016
OperatorAker BP ASA
Position59,8250 N, 2,6317 E

Formations

29 tops reported, measured depth in metres.

GroupsNordland Group, top 176,0 mNordland GpHordaland Group, top 641,7 mHordaland GpUndefined Group, top 1 446,0 mHordaland Group, top 1 542,0 mHordaland GpRogaland Group, top 2 152,0 mRogaland GpShetland Group, top 2 823,0 mShetland GpCromer Knoll Group, top 3 700,0 mViking Group, top 3 828,0 mViking GpVestland Group, top 3 977,0 mVestland GpFormationsUtsira Formation, top 506,0 mSkade Formation, top 641,7 mSkade FmBalder Formation, top 2 152,0 mSele Formation, top 2 234,0 mHermod Formation, top 2 321,0 mLista Formation, top 2 448,0 mLista FmVåle Formation, top 2 741,0 mEkofisk Formation, top 2 823,0 mHardråde Formation, top 2 894,0 mHardråde FmKyrre Formation, top 3 249,0 mKyrre FmTryggvason Formation, top 3 504,0 mTryggvason FmBlodøks Formation, top 3 658,0 mSvarte Formation, top 3 665,0 mRødby Formation, top 3 700,0 mSola Formation, top 3 772,0 mÅsgard Formation, top 3 791,0 mDraupne Formation, top 3 828,0 mHeather Formation, top 3 906,0 mHugin Formation, top 3 977,0 mSleipner Formation, top 4 100,0 mSleipner Fm1761 0002 0003 0004 0004 335

Temperature

Reported at total depth127 °C
Hugin Satellitter gradient33,8 °C/km
Estimated at total depth from the gradient127 °C

The gradient is the median of 11 released wells in Hugin Satellitter with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
25/2-18 A same well0,04 066,0125 °C1,402016
25/2-18 C same well0,04 369,0133 °C1,302016
25/2-18 S same well0,03 887,0129 °C1,302016
25/2-U-90,71 427,0--2021
25/2-U-141,51 300,0--2023
25/2-S-4 AH1,5---2026
25/2-S-4 BH1,5---2026
25/2-S-4 CH1,5---2026

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"214,036"222,0-
Surface casing20"444,526"450,01,32 LOT
Pilot hole-450,09 7/8"450,0-
Surface casing13 3/8"1 533,516"1 541,01,58 FIT
Intermediate9 5/8"3 826,012 1/4"3 832,01,28 FIT
Open hole-4 335,08 1/2"4 335,0-

Mud weight

8 measurements, one dot each, 1,10 to 1,40 g/cm³ against measured depth, versatec.

1,11,21,31,401 0002 0003 0004 0001 483,0 m: 1,30 g/cm³, Versatec1 690,0 m: 1,40 g/cm³, Versatec1 960,0 m: 1,38 g/cm³, Versatec2 996,0 m: 1,38 g/cm³, Versatec3 531,0 m: 1,38 g/cm³, Versatec3 824,0 m: 1,17 g/cm³, Versatec3 832,0 m: 1,40 g/cm³, Versatec4 335,0 m: 1,17 g/cm³, Versatec
Show on the mapOpen on FactPages ↗