25/4-9 S
Exploration, wildcatPlugged and abandonedOil
Drilled by Norsk Hydro Produksjon AS with Deepsea Delta in Vilje, 05.09.2003 to 29.09.2003 (24 days), to 2 377,0 m in the Heimdal Formation.
Water depth120,0 m
Total depth2 377,0 m MD
Vertical depth2 297,3 m TVD
Bottom-hole temperature80 °C
Max inclination23,6°
Rotary table29,0 m
Formation at total depthHeimdal Formation
RigDeepsea Delta
Spud05.09.2003
Completed29.09.2003
OperatorNorsk Hydro Produksjon AS
Position59,6724 N, 2,2780 E
Formations
11 tops reported, measured depth in metres.
Temperature
| Reported at total depth | 80 °C |
1 released well in Vilje report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.
Offset wells
The nearest wellbores within 15 km, straight-line distance at the surface.
| Wellbore | km | Total depth, m | BHT | Mud max, g/cm³ | Year |
|---|---|---|---|---|---|
| 25/4-F-1 AH | 1,8 | 3 583,0 | - | - | 2013 |
| 25/4-F-1 H | 1,8 | 2 850,0 | - | - | 2013 |
| 25/4-E-1 AH | 1,8 | 2 930,0 | - | - | 2007 |
| 25/4-E-1 BY1H | 1,8 | 3 856,0 | - | - | 2007 |
| 25/4-E-1 BY2H | 1,8 | 3 784,0 | - | - | 2007 |
| 25/4-E-1 H | 1,8 | 3 100,0 | - | - | 2006 |
| 25/4-D-1 AH | 1,8 | 3 672,0 | - | - | 2007 |
| 25/4-D-1 H | 1,8 | 2 844,0 | - | - | 2006 |
Casing and formation tests
The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.
| String | Casing | Shoe, m | Hole | Hole depth, m | Test, g/cm³ |
|---|---|---|---|---|---|
| Conductor | 30" | 145,0 | 36" | 149,0 | - |
| Surface casing | 13 3/8" | 1 080,0 | 17 1/2" | 1 086,0 | 1,45 LOT |
| Intermediate | 9 5/8" | 2 231,0 | 12 1/4" | 2 236,0 | 1,40 LOT |
| Open hole | - | 2 377,0 | 8 1/2" | 2 377,0 | - |
Mud weight
8 measurements, one dot each, 1,20 to 1,35 g/cm³ against measured depth, oil based, water based.