WellplannerNorwegian shelf well data

Fields / 6507/3-12

6507/3-12

Exploration, wildcatPlugged and abandonedGas

Drilled by Statoil Petroleum AS with DEEPSEA BERGEN decom, 03.02.2017 to 28.02.2017 (25 days), to 3 451,0 m in the Tofte Formation.

Water depth381,0 m
Total depth3 451,0 m MD
Vertical depth3 450,0 m TVD
Bottom-hole temperature-
Max inclination4,1°
Rotary table23,0 m
Formation at total depthTofte Formation
RigDEEPSEA BERGEN decom
Spud03.02.2017
Completed28.02.2017
OperatorStatoil Petroleum AS
Position65,9678 N, 7,9338 E

Formations

24 tops reported, measured depth in metres.

GroupsNordland Group, top 404,0 mNordland GpHordaland Group, top 1 615,0 mHordaland GpRogaland Group, top 1 885,0 mShetland Group, top 1 986,0 mShetland GpCromer Knoll Group, top 2 614,5 mCromer Knoll GpViking Group, top 2 891,0 mViking GpFangst Group, top 3 295,0 mBåt Group, top 3 396,0 mFormationsNaust Formation, top 404,0 mNaust FmKai Formation, top 1 290,0 mKai FmBrygge Formation, top 1 615,0 mBrygge FmTare Formation, top 1 885,0 mTang Formation, top 1 925,0 mSpringar Formation, top 1 986,0 mSpringar FmKvitnos Formation, top 2 365,0 mKvitnos FmLysing Formation, top 2 614,5 mLange Formation, top 2 621,0 mLange FmLyr Formation, top 2 736,0 mLyr FmSpekk Formation, top 2 891,0 mSpekk FmMelke Formation, top 3 004,0 mMelke FmGarn Formation, top 3 295,0 mNot Formation, top 3 303,0 mIle Formation, top 3 346,5 mRor Formation, top 3 396,0 m4041 0002 0003 0003 451

Temperature

Reported at total depth-

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6507/3-12 A same well0,02 687,0-1,562017
6507/3-83,72 990,0113 °C1,522009
6507/3-44,64 092,0145 °C1,542004
6507/3-U-44,61 200,0--2013
6507/3-104,63 455,0129 °C1,542013
6507/3-15,04 757,0171 °C1,901990
6508/1-1 A5,52 861,086 °C1,401999
6508/1-1 S5,52 750,098 °C1,501999

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"441,036"441,0-
Intermediate13 5/8"1 325,717 1/2"1 334,01,61 FIT
Intermediate9 5/8"2 888,012 1/4"2 898,01,96 LOT
Open hole-3 451,08 1/2"3 451,0-

Mud weight

8 measurements, one dot each, 1,50 to 1,54 g/cm³ against measured depth, xp-07.

1,51,601 0002 0003 0001 325,0 m: 1,53 g/cm³, XP-071 325,0 m: 1,52 g/cm³, XP-071 334,0 m: 1,54 g/cm³, XP-071 396,0 m: 1,51 g/cm³, XP-072 409,0 m: 1,51 g/cm³, XP-072 898,0 m: 1,51 g/cm³, XP-073 197,0 m: 1,51 g/cm³, XP-073 451,0 m: 1,51 g/cm³, XP-07
Show on the mapOpen on FactPages ↗