WellplannerNorwegian shelf well data

Fields / 6507/7-11 S

6507/7-11 S

Exploration, wildcatPlugged and abandonedDry

Drilled by Conoco Norway Inc. with Mærsk Jutlander, 25.06.1997 to 14.08.1997 (50 days), to 3 749,0 m in the Åre Formation.

Water depth274,0 m
Total depth3 749,0 m MD
Vertical depth3 744,0 m TVD
Bottom-hole temperature127 °C
Max inclination7,8°
Rotary table23,0 m
Formation at total depthÅre Formation
RigMærsk Jutlander
Spud25.06.1997
Completed14.08.1997
OperatorConoco Norway Inc.
Position65,3013 N, 7,1284 E

Formations

26 tops reported, measured depth in metres.

GroupsNordland Group, top 297,0 mNordland GpHordaland Group, top 1 857,0 mHordaland GpRogaland Group, top 2 072,0 mRogaland GpShetland Group, top 2 189,0 mShetland GpCromer Knoll Group, top 2 901,0 mCromer Knoll GpViking Group, top 3 327,0 mViking GpFangst Group, top 3 458,0 mBåt Group, top 3 558,0 mBåt GpFormationsNaust Formation, top 297,0 mNaust FmKai Formation, top 1 509,0 mKai FmBrygge Formation, top 1 857,0 mBrygge FmTare Formation, top 2 072,0 mTang Formation, top 2 158,0 mSpringar Formation, top 2 189,0 mNise Formation, top 2 230,0 mKvitnos Formation, top 2 321,0 mKvitnos FmLysing Formation, top 2 901,0 mLange Formation, top 2 914,5 mLange FmLyr Formation, top 3 322,0 mSpekk Formation, top 3 327,0 mMelke Formation, top 3 348,0 mGarn Formation, top 3 458,0 mNot Formation, top 3 476,0 mIle Formation, top 3 497,0 mRor Formation, top 3 558,0 mTilje Formation, top 3 615,0 mTilje Fm2971 0002 0003 0003 749

Temperature

Reported at total depth127 °C

The wellbore is not in a field, so no field gradient applies.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
6507/7-16 S4,73 238,0--2019
6507/7-U-86,4375,8--1991
6507/7-B-1 H6,43 328,0--1994
6507/7-B-2 H6,43 321,0--1994
6507/7-B-3 H6,43 825,0--1994
6507/7-B-4 H6,45 658,0--1999
6507/7-46,62 850,098 °C1,431985
6507/7-38,02 850,098 °C1,391985

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"359,036"360,0-
Surface casing20"749,026"754,01,37 LOT
Intermediate13 3/8"1 987,017 1/2"1 995,01,92 LOT
Intermediate9 5/8"3 357,012 1/4"3 365,01,96 LOT
Open hole-3 749,08 1/2"3 749,0-

Mud weight

15 measurements, one dot each, 1,20 to 1,70 g/cm³ against measured depth, kcl/gem gp, spud mud.

1,21,31,41,51,61,701 0002 0003 000330,0 m: 1,20 g/cm³, SPUD MUD680,0 m: 1,20 g/cm³, SPUD MUD806,0 m: 1,28 g/cm³, KCL/GEM GP1 123,0 m: 1,31 g/cm³, KCL/GEM GP1 598,0 m: 1,27 g/cm³, KCL/GEM GP1 987,0 m: 1,27 g/cm³, KCL/GEM GP2 500,0 m: 1,52 g/cm³, KCL/GEM GP2 788,0 m: 1,64 g/cm³, KCL/GEM GP3 049,0 m: 1,64 g/cm³, KCL/GEM GP3 061,0 m: 1,70 g/cm³, KCL/GEM GP3 204,0 m: 1,70 g/cm³, KCL/GEM GP3 246,0 m: 1,70 g/cm³, KCL/GEM GP3 343,0 m: 1,68 g/cm³, KCL/GEM GP3 365,0 m: 1,70 g/cm³, KCL/GEM GP3 749,0 m: 1,20 g/cm³, KCL/GEM GP
Show on the mapOpen on FactPages ↗