WellplannerNorwegian shelf well data

Fields / Eirin / 15/5-2

15/5-2

Exploration, wildcatSuspendedGas

Drilled by Norsk Hydro Produksjon AS with Treasure Seeker in Eirin, 16.08.1978 to 16.12.1978 (122 days), to 4 322,0 m in the Hegre Group.

Water depth121,0 m
Total depth4 322,0 m MD
Vertical depth-
Bottom-hole temperature127 °C
Max inclination5,8°
Rotary table25,0 m
Formation at total depthHegre Group
RigTreasure Seeker
Spud16.08.1978
Completed16.12.1978
OperatorNorsk Hydro Produksjon AS
Position58,6435 N, 1,6046 E

Formations

26 tops reported, measured depth in metres.

GroupsNordland Group, top 145,0 mNordland GpHordaland Group, top 910,0 mHordaland GpRogaland Group, top 2 128,0 mRogaland GpShetland Group, top 2 705,0 mShetland GpCromer Knoll Group, top 3 647,0 mViking Group, top 3 759,0 mViking GpVestland Group, top 3 960,0 mVestland GpHegre Group, top 4 113,0 mHegre GpFormationsUtsira Formation, top 758,0 mUtsira FmFrigg Formation, top 1 608,0 mFrigg FmBalder Formation, top 2 128,0 mSele Formation, top 2 162,0 mLista Formation, top 2 204,0 mHeimdal Formation, top 2 252,0 mHeimdal FmLista Formation, top 2 606,0 mTy Formation, top 2 650,0 mEkofisk Formation, top 2 705,0 mTor Formation, top 2 782,0 mTor FmHod Formation, top 2 967,0 mHod FmBlodøks Formation, top 3 507,0 mHidra Formation, top 3 588,0 mRødby Formation, top 3 647,0 mDraupne Formation, top 3 759,0 mHeather Formation, top 3 831,0 mHugin Formation, top 3 960,0 mSleipner Formation, top 3 995,0 mSleipner Fm1451 0002 0003 0004 0004 322

Temperature

Reported at total depth127 °C

2 released wells in Eirin report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
15/5-2 R same well0,04 322,0127 °C-1979
15/5-U-12,21 070,0--2024
15/5-C-1 H2,25 514,0--2024
15/5-C-2 H2,21 082,0---
15/5-43,02 300,063 °C1,261991
15/5-66,42 725,061 °C1,501997
15/6-A-6 Y1H6,94 513,0--2004
15/6-A-6 Y2H6,94 520,0--2004

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"194,036"194,5-
Surface casing20"454,026"469,0-
Intermediate13 3/8"1 598,017 1/2"1 615,0-
Intermediate9 5/8"3 696,012 1/4"3 714,0-
Liner7"4 300,08 1/2"4 322,0-

Mud weight

6 measurements, one dot each, 1,10 to 1,59 g/cm³ against measured depth, waterbased.

1,11,21,31,41,51,601 0002 0003 0004 000194,0 m: 1,20 g/cm³, waterbased469,0 m: 1,14 g/cm³, waterbased1 462,0 m: 1,20 g/cm³, waterbased3 682,0 m: 1,34 g/cm³, waterbased3 872,0 m: 1,43 g/cm³, waterbased4 013,0 m: 1,59 g/cm³, waterbased
Show on the mapOpen on FactPages ↗