WellplannerNorwegian shelf well data

Fields / Tyrving / 25/5-9

25/5-9

Exploration, wildcatPlugged and abandonedOil

Drilled by Total E&P Norge AS with Leiv Eiriksson in Tyrving, 01.01.2014 to 25.02.2014 (55 days), to 2 265,0 m in the Heimdal Formation.

Water depth122,0 m
Total depth2 265,0 m MD
Vertical depth2 265,0 m TVD
Bottom-hole temperature83 °C
Max inclination2,2°
Rotary table25,0 m
Formation at total depthHeimdal Formation
RigLeiv Eiriksson
Spud01.01.2014
Completed25.02.2014
OperatorTotal E&P Norge AS
Position59,6180 N, 2,3964 E

Formations

12 tops reported, measured depth in metres.

GroupsNordland Group, top 147,0 mNordland GpHordaland Group, top 924,0 mHordaland GpHordaland Group, top 1 052,0 mHordaland GpRogaland Group, top 2 083,0 mRogaland GpFormationsUtsira Formation, top 390,0 mUtsira FmSkade Formation, top 978,0 mSkade FmGrid Formation, top 1 292,5 mGrid FmFrigg Formation, top 2 036,0 mBalder Formation, top 2 083,0 mSele Formation, top 2 104,0 mLista Formation, top 2 138,0 mHeimdal Formation, top 2 182,0 mHeimdal Fm1475001 0001 5002 0002 265

Temperature

Reported at total depth83 °C

2 released wells in Tyrving report a bottom-hole temperature at 1,000 m or more below the sea floor; 3 are needed to estimate the temperature.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
25/5-80,11 199,0-1,202013
25/5-H-1 AH2,62 885,0--2024
25/5-H-1 BY1H2,65 660,0--2024
25/5-H-1 BY2H2,65 984,0--2024
25/5-H-1 BY3H2,65 840,0--2024
25/5-H-1 H2,62 724,0--2024
25/5-H-2 AH2,63 948,0--2024
25/5-H-2 H2,62 840,0--2024

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"215,036"215,0-
Surface casing20"481,026"491,0-
Intermediate13 3/8"1 250,017 1/2"1 260,01,50 FIT
Intermediate9 5/8"2 119,012 1/4"2 153,01,46 FIT
Open hole-2 265,08 1/2"2 265,0-

Mud weight

8 measurements, one dot each, 1,10 to 1,35 g/cm³ against measured depth, drill-in fluid, polymer new tech, silicate, spud mud.

1,11,21,31,405001 0001 5002 000491,0 m: 1,35 g/cm³, Spud Mud491,0 m: 1,35 g/cm³, Spud Mud559,0 m: 1,15 g/cm³, Polymer New Tech1 260,0 m: 1,20 g/cm³, Polymer New Tech1 264,0 m: 1,33 g/cm³, Silicate1 461,0 m: 1,35 g/cm³, Silicate2 153,0 m: 1,35 g/cm³, Silicate2 265,0 m: 1,14 g/cm³, Drill-In Fluid
Show on the mapOpen on FactPages ↗