WellplannerNorwegian shelf well data

Fields / Martin Linge / 30/4-3 S

30/4-3 S

Exploration, wildcatReclassified to developmentGas and condensate

Drilled by Total E&P Norge AS with Maersk Intrepid in Martin Linge, 16.06.2016 to 09.10.2016 (115 days), to 4 605,0 m in the Dunlin Group.

Water depth115,0 m
Total depth4 605,0 m MD
Vertical depth4 201,0 m TVD
Bottom-hole temperature-
Max inclination36,9°
Rotary table57,7 m
Formation at total depthDunlin Group
RigMaersk Intrepid
Spud16.06.2016
Completed09.10.2016
OperatorTotal E&P Norge AS
Position60,5062 N, 2,0148 E

Formations

29 tops reported, measured depth in metres.

GroupsNordland Group, top 173,0 mNordland GpHordaland Group, top 712,0 mHordaland GpRogaland Group, top 1 997,0 mRogaland GpShetland Group, top 2 392,0 mShetland GpViking Group, top 4 079,0 mViking GpBrent Group, top 4 250,0 mBrent GpDunlin Group, top 4 583,0 mFormationsUndifferentiated, top 173,0 mUtsira Formation, top 315,0 mUtsira FmSkade Formation, top 712,0 mSkade FmNo Formal Name, top 1 006,0 mNo Formal NameFrigg Formation, top 1 829,0 mFrigg FmBalder Formation, top 1 997,0 mHermod Formation, top 2 122,0 mSele Formation, top 2 166,0 mLista Formation, top 2 215,0 mLista FmEkofisk Formation, top 2 392,0 mJorsalfare Formation, top 2 418,0 mJorsalfare FmKyrre Formation, top 2 760,5 mKyrre FmTryggvason Formation, top 3 904,0 mBlodøks Formation, top 3 974,0 mSvarte Formation, top 3 993,6 mDraupne Formation, top 4 079,0 mHeather Formation, top 4 131,0 mTarbert Formation, top 4 250,0 mNess Formation, top 4 377,0 mNess FmEtive Formation, top 4 549,0 mRannoch Formation, top 4 556,0 mUndifferentiated, top 4 583,0 m1731 0002 0003 0004 0004 613

Temperature

Reported at total depth-
Martin Linge gradient31,3 °C/km
Estimated at total depth from the gradient130 °C

The gradient is the median of 7 released wells in Martin Linge with a reported bottom-hole temperature, counted from 4 °C at the sea floor.

Offset wells

The nearest wellbores within 15 km, straight-line distance at the surface.

WellborekmTotal depth, mBHTMud max, g/cm³Year
30/4-A-90,04 605,0--2016
30/4-A-160,04 535,0--2021
30/4-A-100,04 690,0--2014
30/4-A-80,04 703,0--2014
30/4-A-170,04 317,0--2021
30/4-A-10,03 518,0--2014
30/4-A-30,02 055,0--2014
30/4-A-3 A0,02 831,0--2015

Casing and formation tests

The casing programme as reported, shallowest first. The test is the leak-off (LOT) or formation integrity (FIT) result as an equivalent mud density.

StringCasingShoe, mHoleHole depth, mTest, g/cm³
Conductor30"254,536"258,0-
Surface casing20"1 210,526"1 219,01,60 FIT
Liner17"2 195,017 1/2"2 225,01,72 LOT
Intermediate13 5/8"3 516,316"3 525,01,95 FIT
Intermediate10"4 147,112 1/4"4 150,02,17 FIT
Open hole-4 605,08 1/2"4 605,0-

Mud weight

17 measurements, one dot each, 1,00 to 2,06 g/cm³ against measured depth, kcl/polymer-glycol, nabm, sea water, silicate.

1,01,21,41,61,82,02,201 0002 0003 0004 000237,0 m: 1,03 g/cm³, Sea water1 214,5 m: 1,10 g/cm³, Silicate1 218,5 m: 1,11 g/cm³, Silicate1 230,5 m: 1,39 g/cm³, KCl/Polymer-Glycol1 502,5 m: 1,42 g/cm³, KCl/Polymer-Glycol2 224,5 m: 1,62 g/cm³, NABM2 224,5 m: 1,42 g/cm³, KCl/Polymer-Glycol2 225,0 m: 1,42 g/cm³, KCl/Polymer-Glycol3 525,0 m: 1,62 g/cm³, NABM3 528,0 m: 1,80 g/cm³, NABM3 757,0 m: 1,85 g/cm³, NABM4 015,0 m: 1,86 g/cm³, NABM4 150,0 m: 2,04 g/cm³, NABM4 150,0 m: 1,84 g/cm³, NABM4 204,0 m: 2,06 g/cm³, NABM4 404,0 m: 2,04 g/cm³, NABM4 605,0 m: 2,04 g/cm³, NABM
Show on the mapOpen on FactPages ↗